Dana Marine Exhaust - New Lower Pricing
09-29-2005, 04:06 PM
#11
Registered
Join Date: Jul 2005
Location: Poughkeepsie NY /Ocean City MD
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dana Marine Exhaust - New Lower Pricing
Originally Posted by dana marine products
Custom tail pipes are available, need o2 sensor fittings? No problem, Custom tail pipe configuration? No problem. If one of our standard kits won't work, give us a call.
09-29-2005, 04:47 PM
#12
Registered
Thread Starter
Join Date: Feb 2005
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dana Marine Exhaust - New Lower Pricing
We currently offer a standard down sweep set of risers that works perfect on applications that go under the swim platform. We would use a second floating 70 degree elbow to turn it back out of the transom. If you want it all fabricated out of SS tubing, it can be done with really good dimensions.
01-25-2006, 10:25 PM
#14
Registered
Join Date: Apr 2005
Location: Antioch IL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dana Marine Exhaust - New Lower Pricing
I would also like pricing on two sets for a 2000 32 ft fountain with twin 502's with I would like to keep the captains call. How much wieght savings do they have over stock manifolds?
I am also thinking of putting on some aluminum heads.....any recommendations and pricing would be helpfull
I am also thinking of putting on some aluminum heads.....any recommendations and pricing would be helpfull
Last edited by corbvette; 01-25-2006 at 10:28 PM.
01-26-2006, 09:31 AM
#15
Re: Dana Marine Exhaust - New Lower Pricing
I am pulling the trigger on 2 sets the 1st of the month. I think they look great & hope they perform as well as Dana claims. They do make a short riser for silent choice. The only thing I have a concern with is the mounted width. 34" is the width when mounted on BBC's. The guy @ Dana told me they can mill off the name plate on the manifolds for a little extra room. The other thing that is a bother is they don't have a soultion for the oil filter mount. It can't be that big a deal, but still an obstical none the less.
Dana, do you have any suggestions for the oil filter bracket?
Dana, do you have any suggestions for the oil filter bracket?
01-27-2006, 10:51 PM
#17
Platinum Member
Platinum Member
Join Date: Jan 2006
Location: Brookyn NY
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dana Marine Exhaust - New Lower Pricing
Originally Posted by KYElimEagle
Just put two sets on my boat. Ordered them recommended by Fred. They look and work great. Also, they had to make two custom risers, they did this quickly and perfectly. Thanks again, Eric
Fred could these work out for my motors with the specs we were disscussing today, or is it more of a fit all header?
01-29-2006, 07:34 AM
#18
Platinum Member
Platinum Member
Join Date: Jan 2006
Location: Brookyn NY
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dana Marine Exhaust - New Lower Pricing
Fred,
I just noticed in the other post that they have 27" primary tubes
not like the short tubes we spoke about in CMI .
Hope those CMI pipes can be ajusted to 12".
I just noticed in the other post that they have 27" primary tubes
not like the short tubes we spoke about in CMI .
Hope those CMI pipes can be ajusted to 12".
03-01-2006, 07:26 AM
#19
Charter Member
Charter Member
Re: Dana Marine Exhaust - New Lower Pricing
How far down does the water colling water dump back in to the exhaust, on a stock manifold/riser configuration for a stock Merc. 502 MPI?
Thanks,
Dean
Thanks,
Dean
03-27-2006, 03:05 PM
#20
Registered
Join Date: Jul 2005
Location: Poughkeepsie NY /Ocean City MD
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dana Marine Exhaust - New Lower Pricing
i guess the tube risers are on back order. i have been told they would be shipped last week, but still havent heard anything from them about shipping them out. got my manifolds last week and there beautiful though 
