Muffler Noise Reduction
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Nov 2005
Location: Tampa, FL/Milwaukee WI
Posts: 204
Likes: 0
Received 2 Likes
on
2 Posts
Muffler Noise Reduction
Has anyone found a muffler system to successfully achieve 88 decibels on twin 1,000 hp motors with no reversion. I already know about steath and turndowns. Too much back pressure with steath with low rpm motor (difficulty with tuning EFI) and turn downs look weird on a Cat. Suggestions?
#2
I put GGB mufflers on my 43 with 900 sounds great and you can have a conversations with the motor running. don't know about the decibels ratings but it is Qwest. the company is out of Canada.
#4
Mine Is at Nortech as well, I belive they are clamp on. give the guys at GGB a call they are very helpfull or Ask roy (tell him Vinny's Boat) to look at mine. They do a great job.
My Mechanic dave at Wesco recommended them and he put them on.
My Mechanic dave at Wesco recommended them and he put them on.
#8
Platinum Member
Platinum Member
Join Date: Jun 2006
Location: Boulder CO , LOTO, Clearwater Beach
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
GK where in Tampa are you ? We just purchased a home in Clearwater Beach and and am considering bringing our Nor Tech down from LOTO. I also ordered a set of 24" to comply w/ noise laws here
#9
Platinum Member
Platinum Member
Thread Starter
Join Date: Nov 2005
Location: Tampa, FL/Milwaukee WI
Posts: 204
Likes: 0
Received 2 Likes
on
2 Posts
Wgg - I have a place in Palm Harbor next to Clearwater. Email me and we can talk and hook up sometime. I can give some thoughts on the Tampa Bay area for your boat. [email protected]