Originally Posted by boatingbent (Post 2395519)

Nice looking Cars......I just bought a 69 Firebird

Do you use Sata Guns in your shop????I am the owner of Sata Spray Equipment

Originally Posted by littledcsrodshop (Post 2395393)

No not interested in buying the boat. Just kinda interested in how it is holding up & I would also like to know what kind of prop slip #'s it's running ?

Also since I am not familiar with the 35 flame & what kind of speeds it runs with twin power making the same as that single I would like to know how they compair speed wise. I am pretty sure that it would be faster than a twin with the same power as is a boat like mine with a twin v/s a single making the same power. For example my boat would take (approx.) twin 500's totaling 1000 hp to run around the same speed as a single 750.

I would love to give it a try in my boat b/c it would be a good platform to use to compare performance , seeing that I have a real good Idea what kind of speeds it will run with given single power as compaired to twins , where as the 35 Nordic to my knowledge has never been ran with single power & a single drive.

& Oh yeah I was kinda hoping the owner of the boat decided to repower the boat with twins & the splitter was laying in their garage collecting dust & needed a new home in the hills of TN... Of course comfortably behind my blown BBC & in front of 2 XR ITS's hanging off the back of my Saber ..:D

My transom is a clean canvas & I have plenty of room in the engine compartment. Now If I could only convince Imco , or SCS , or another mfg. That my boat is the perfect candidate for a test ......

Originally Posted by littledcsrodshop (Post 2395506)

If you are in Cartersville , GA I am actually not that far north of you I am located in Athens , TN

The 37 in my Avatar is a car I did for a customer a couple years ago. The pic was taken at the Street Rod Nats. in Louisville. PPG used it in their display. I don't do a whole lot of customer stuff due to the fact that time is always a bit hard for me to find but occasionally I will make exceptions... I just finished a 1 year project on a really nice 69 Z28 for a good friend. We mainly do insurance wrecks at the shop (not my #1 choice) but it feeds the family so... However I somehow always end up with a project of some sort be it a rod , a bike , or an offshore , or a combo... lol...

Are you looking for a new build turn-key car ? , or a previously owned rod ? , Steel or glass ??

The car pictured is a Downs body on a Air-ride TCI chassis

Here is a shot of the 69 Z28 I just finished a few weeks ago (not the best pic & lighting it was taken from my phone) & also a shot of a 37 roadster that I did some work on for another customer of mine . Hopefully my Saber is next in line !!

Originally Posted by jima97 (Post 2396669)

I like the American Street Rod coupe. I need one complete. Pre owned would be find.

http://www.americanstreetrod.com

Originally Posted by littledcsrodshop (Post 2395549)

Actually I do & both of the cars pictured & the 37 in my avitar I shot with a Sata RP. I bought it when was working on the orange 37 in my avitar & it was the first car I used it on. Now I use it daily they are great guns... Now I know who to talk to when I need something.... lol....

Originally Posted by Nordicflame (Post 2399695)

Bob Teague has a few interesting thoughts on the Nordic splitter in this months Powerboat tech.
FYI