any nordic guys
#1
Registered
Thread Starter
Join Date: Nov 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
any nordic guys
Just bought a 07 25'' rage it needs power . Looking at mercruiser 500efi motor to buy. I have a bravo 1 drive with a 1.65 gear. With this engine and gear what kind of speed should I get and what prop. I have always ran 3 blades on my baja's.
#2
Registered
Join Date: May 2010
Location: LeClaire Ia
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a 07 rage with the 496Ho, bravo 1 X and a labbed 27 4 blade and running 75 gps. I'm sure with a 500 efi the #'s would look a lot better.
For the drive I'm sure you have a Bravo X on there but check into the HP ratings with going with a higher Hp motor. What was/happened to previous motor?
bravo 1 400 hp
bravo 1 X 425 hp
Bravo 1 XR 600 hp.
Got any pics?
Last edited by mreedy; 11-15-2010 at 01:02 PM.
#6
Registered
Join Date: Oct 2009
Location: San Antonio, Texas
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
That's pretty good speed...
how does you boat do getting on plane? I have an '05 with the 425HO and I run a 4 blade 26 labbed. My kids love skiing, tubing, and wakeboarding. I'm curious if I could get away with a 27? I'm considering a P5X too.
Welcome..
I'm running a 07 rage with the 496Ho, bravo 1 X and a labbed 27 4 blade and running 75 gps. I'm sure with a 500 efi the #'s would look a lot better.
For the drive I'm sure you have a Bravo X on there but check into the HP ratings with going with a higher Hp motor. What was/happened to previous motor?
bravo 1 400 hp
bravo 1 X 425 hp
Bravo 1 XR 600 hp.
Got any pics?
I'm running a 07 rage with the 496Ho, bravo 1 X and a labbed 27 4 blade and running 75 gps. I'm sure with a 500 efi the #'s would look a lot better.
For the drive I'm sure you have a Bravo X on there but check into the HP ratings with going with a higher Hp motor. What was/happened to previous motor?
bravo 1 400 hp
bravo 1 X 425 hp
Bravo 1 XR 600 hp.
Got any pics?
#7
Registered
Join Date: May 2010
Location: LeClaire Ia
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Honestly the prop is not mine. It's a Spinelli Bros 27 and a buddy has been letting me run it. Its a set and he is having a hard time letting go.
Ive tested a labbed 26 from BBlades and hit 73 with more RPM to go; they say they can get more out of it for me so I'll be checking into that next season.
I have kids and pull tubes and ski's fairly easy but its all in the Tabs. the tabs are the Dana HP 1000, 12" wide and 24" long. Put them down and you'll come out flat.
Here's a pic of them.
Ive tested a labbed 26 from BBlades and hit 73 with more RPM to go; they say they can get more out of it for me so I'll be checking into that next season.
I have kids and pull tubes and ski's fairly easy but its all in the Tabs. the tabs are the Dana HP 1000, 12" wide and 24" long. Put them down and you'll come out flat.
Here's a pic of them.
#9
Gold Member
Gold Member
iTrader: (2)
Join Date: Feb 2007
Location: SL,UT
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Keep in mind with your 1.65 drive you'll run about a size larger prop then the guys with the more common 1.50. Like a 28 instead of a 26 bravo...
I have tried a few and for the price, a factory merc labbed bravo 1 works the best on mine.
Whats your elevation?
I have tried a few and for the price, a factory merc labbed bravo 1 works the best on mine.
Whats your elevation?
Last edited by DesertRage; 11-19-2010 at 09:11 AM.