Offshoreonly.com - Dana flow tourque vs. Lightning headers

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Nordic (https://www.offshoreonly.com/forums/nordic-99/)

- - Dana flow tourque vs. Lightning headers (https://www.offshoreonly.com/forums/nordic/323940-dana-flow-tourque-vs-lightning-headers.html)

Quote:

Originally Posted by Jorgenson19 (Post 4277925)

Dana products are being made but Dana marine has closed their doors. Marine industries west is manufacturing the Dana products. Just placed my order today for a set of Flow Tourques

Thanks! There is a Dana item I need and I thought I was SOL. Went to Marine Industries web site and they have it!

Padraig

Quote:

Originally Posted by Jorgenson19 (Post 4277506)

I am looking at purchasing either the Dana flow tourque manifolds or lightning headers (freshwater). Boat is run in freshwater only. I have seen the results of the full throttle marine dyno reports and was originally leaning towards the lightnings. But after seeing the report by Full throttle marine I turned my direction towards the Danas. Both options are around the same cost. Hoping someone can provide me some info on their experience that they have had with either product? Boat they are going on is a 2002 Nordic Rage 25 with a 496 HO and a bravo x drive. Boat has a whipple stage 2 ECM upgrade.

Check300 makes over 1,500 HP with the Dana's

Great exhaust manifold

Jon

Also like that the Dana's run full length primary's

Jon