![]() |
|
I would guess that is a speedometer number. I am going to eventually test and maybe swap to a 26 myself but with the arrival of the summer heat I won't get any great numbers until next fall. For all that I have read 75-76 would be accurate, hope to have actual results myself later this year.
|
Originally Posted by zgoo
(Post 4312824)
Here is a link
https://www.dropbox.com/s/9ppt6xiqax...95191.jpg?dl=0 https://www.dropbox.com/s/e1ztig5zhp...39.05.jpg?dl=0 https://www.dropbox.com/s/r6an3iobjo...63857.jpg?dl=0 https://www.dropbox.com/s/o9hluqrfr5...64608.jpg?dl=0 https://www.dropbox.com/s/mewrbqamov...5_001.jpg?dl=0 |
Originally Posted by USMC2010
(Post 4312949)
I would guess that is a speedometer number. I am going to eventually test and maybe swap to a 26 myself but with the arrival of the summer heat I won't get any great numbers until next fall. For all that I have read 75-76 would be accurate, hope to have actual results myself later this year.
|
Dave , Dean sold it to him for 39K
|
Originally Posted by zgoo
(Post 4312985)
Dave , Dean sold it to him for 39K
So what are your plans for yours any upgrades? He said his gets transom soot pretty bad from the exhaust and was getting a stage 1 Whipple tune to cure it. |
I think he bought it new 75k and the engine was not rigged at the time and when it was finished they shipped it to Seattle and he picked it up. He was not happy that they put the trailer in salt water for the sea trials. I think it is odd that he painted the side of the boat and put graphics over the stock graphics that were on there from the factory. I know Dean and his brother who owns a big body shop in Gresham. Dean is a master of pin stripping and sign work. The graphics on the boat looks good but I don't like paint on a boat.
|
Originally Posted by zgoo
(Post 4313124)
I think he bought it new 75k and the engine was not rigged at the time and when it was finished they shipped it to Seattle and he picked it up. He was not happy that they put the trailer in salt water for the sea trials. I think it is odd that he painted the side of the boat and put graphics over the stock graphics that were on there from the factory. I know Dean and his brother who owns a big body shop in Gresham. Dean is a master of pin stripping and sign work. The graphics on the boat looks good but I don't like paint on a boat.
|
Yes on the wrap, and if it gets damaged just peel it off!! Looking forward to going out tomorrow!!!
|
Originally Posted by zgoo
(Post 4314029)
Yes on the wrap, and if it gets damaged just peel it off!! Looking forward to going out tomorrow!!!
|
| All times are GMT -5. The time now is 12:42 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.