Go Back  Offshoreonly.com > Owners Forum > Nordic
Labor Day weekend was an expensive one for me >

Labor Day weekend was an expensive one for me

Notices

Labor Day weekend was an expensive one for me

Thread Tools
 
Old 09-20-2015, 07:25 PM
  #1  
Registered
Thread Starter
 
Join Date: Jul 2012
Location: Cincinnati, Ohio
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default Labor Day weekend was an expensive one for me

I dropped my phone in the lake on Sunday evening, then Monday morning on the way to the boat ramp to load out my lifter collapsed and on the way home I broke a belt on one of the trailer tires. My 525 only has 239 hours and has been ticking on and off all summer since 203 hours. I pulled the valve cover on that side at 220 hours and removed the rockers to inspect everything. I didn't find anything so I re ran the rockers and the tick went away until the week before Labor Day. You could only ever hear it at idle with the hatch open, I changed the oil and cut open the filter the weekend before Labor Day and found nothing in the filter. I was planning on doing a top end freshen up this fall and then this happened. Oh well at least it made it all summer and it could always be worse!

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Dirty_D is offline  
Old 09-20-2015, 07:36 PM
  #2  
Registered
Platinum Member
iTrader: (3)
 
Join Date: May 2013
Location: Long Island, NY
Posts: 1,754
Likes: 0
Received 6 Likes on 6 Posts
Default

what are those pieces of in the lifter valley ? is that one stuck on the cam?
HyFive578 is offline  
Old 09-20-2015, 07:43 PM
  #3  
VIP Member
VIP Member
iTrader: (6)
 
97FASTech's Avatar
 
Join Date: Jan 2011
Location: Canyon Lake/ Houston, TX
Posts: 1,161
Received 35 Likes on 17 Posts
Default

Mine did the exact same thing, but Memorial Day weekend 2014. Rushed the build to get ready for the TX Outlaw Challenge, never ran right the whole summer. Took it back at the end of season for another rebuild. Moral of story, don't Rush!!!! Now it runs like it's meant to be, fast and lots of torque.

Last edited by 97FASTech; 09-20-2015 at 07:49 PM.
97FASTech is offline  
Old 09-20-2015, 07:46 PM
  #4  
Registered
iTrader: (3)
 
Join Date: Apr 2006
Location: Toledo Oh
Posts: 10,061
Received 690 Likes on 276 Posts
Default

So you have gone from roller lifters to jagged tappet.... custom!!!
phragle is offline  
Old 09-20-2015, 08:34 PM
  #5  
Registered
Thread Starter
 
Join Date: Jul 2012
Location: Cincinnati, Ohio
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes you could say that Phragle! Those pieces are the roller tip that broke off the lifter and if you look closely you can see the needle bearings also. No rushing here!! I have all winter and heck it's already winterized now!
Dirty_D is offline  
Old 09-20-2015, 08:52 PM
  #6  
Registered
iTrader: (3)
 
Join Date: Apr 2006
Location: Toledo Oh
Posts: 10,061
Received 690 Likes on 276 Posts
Default

Do NOT forget the other stuff that can freeze,,,,your coolers etc sitting in the bilge....
phragle is offline  
Old 09-21-2015, 06:06 AM
  #7  
Registered
Thread Starter
 
Join Date: Jul 2012
Location: Cincinnati, Ohio
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

That was kind of a joke but the antifreeze and water has all been drained anyways. The motor will be coming out of the boat in a week or so when I get time.
Dirty_D is offline  
Old 09-23-2015, 09:35 PM
  #8  
Registered
 
Steve Zuckerman's Avatar
 
Join Date: Nov 2002
Location: Nashvegas, TN
Posts: 2,621
Likes: 0
Received 1 Like on 1 Post
Default

OUCH...........at least you timed it right. Who's doing the rebuild?
Steve Zuckerman is offline  
Old 09-25-2015, 04:49 PM
  #9  
Registered
Thread Starter
 
Join Date: Jul 2012
Location: Cincinnati, Ohio
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

I am. Going to do complete top end, then main bearings and rings shouldn't need anything else well except a cam.
Dirty_D is offline  
Old 09-25-2015, 09:32 PM
  #10  
Registered
 
Tinkerer's Avatar
 
Join Date: Jan 2002
Location: ALTO, MI
Posts: 4,612
Received 7 Likes on 6 Posts
Default

That will buff out.











Time to do an upgrade.
Tinkerer is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.