Re: 500 EFI Power Increase
 

Linnie sounds like your real close . Did you change the cams?To what?.Yea it sounds like if ya leaned it out some and proped it up you will pick up some more .Becarefull swiming around the lab props :eek:

The prop guys are saying I might have to go up 6 pitch sizes

I am happy with Mark also and we made some good #'s I just wish I had the drives to handle all the power I made :eek:

Mark stays so bussy I dont see how he does it.There was 3 motors waiting to dyno after mine .

Re: 500 EFI Power Increase
 

I have to give it to ya Linnie, your aggressive. What is freight to Precision?

Re: 500 EFI Power Increase
 

Lennie does things first class or he doesnt do it at all!! I admire him for his goals he has set, it will all be worth it come summer.

Re: 500 EFI Power Increase
 

Here's pictures of the motors installed right before I pulled one to go to Precision Marine for Dyno Test.

Notice the Vortech flame arrestors. I think they add a nice touch.

Re: 500 EFI Power Increase
 

Here's the motor getting ready to get sealed. Trucking company will be here at 2:00 today to pick up.

On the way to Precision Marine for Dyno test and final power dial in.

I hope the trucking company can get it back just like this.

Re: 500 EFI Power Increase
 

Nice box Linnie!!
Don't forget to mark it "This Side Up" :D :D :D

Re: 500 EFI Power Increase
 

Hey Linnie dont forget your drill :D

Good luck on the dyno, Mark will take care of ya Did ya send the other computer with it?

Keep us posted


rob

Re: 500 EFI Power Increase
 

Dave, Its marked all kinds of ways. I finally got Overnight to insure it for 28K. Most every trucking company only wanted to give me $2 per lb. coverage.

Did not forget the Drill. I even sent the lifting arrangement for Mark.

Re: 500 EFI Power Increase
 

Rob,

Sent both computers, Mark said he might get to it next week if I get it to him early enough.

R U running yet? 95 with no steering could be scary.

Re: 500 EFI Power Increase
 

I'm sure it will arrive just like you sent it..... :eek: