WTB or build 502/454
 

Does anyone know of someone looking to unload a 502 or 454, or can some one reffer a good local shop to freshen up a 454 MAG. Thanks Happy Thanksgiving

If your looking for someone close, there is Tom Caughlin machine in Canton MA. Does a very good job and don't rake over the coals on the price.
Mike

Thanks do you know how I could contact him does he have a shop Thanks again

Matt

Give Caughlin a shout! They have done alot of motors running in Sutphens up around here!

Still looking to freshen up or buy a motor before the season. I have a 454 mag anyone looking for some work or have something to sell ?? let me know

Matt

Hey Matt, I have a 468 short block with about 40 hours on it. All forged internals. Engine made 580 HP with Merlin iron heads and a single carb. It's low comp, 8.5:1 and can be run or reg gas and also a blower which I also have available. Looking to get $2500. for the short block and $3K for the blower if your interested. I can also hook you up with all of the rest of the parts you would need, price depending on what you wanted in heads, cam intake etc.

What would you be looking for the long block?

I only have the short block here. I can get you another set of Merlin heads and another cam set up but price would depend on what you wanted in heads and cam. Give me a call and we can discuss some options. Bill Redmond 215-768-4172

Give Jc Performance a call he made 515hp out of my 454 mag efi & it idled at 800 rpm.

Matt, I have a 500 HP carbureted complete engine. I'll consider taking yours in on trade. I was asking 6K. Give me a call and I'll make you a deal you can't refuse. 914-262-1898 Thanks.

How can I get in topuch with JC proformace? Thanks

Matt

I would like to keep the fuel injection set up thanks though

No problem I'll take the longblock and whatever accessories you don't want. Thanks. Holden

hey just saw this give me a call, theres some local guys that might be able to get you set if you don't want to travel, my motor cost me 500 to ship from NJ to OHIO :eek::eek:now its going to cost me close to that to get it here, even if I pick it up its Alot of gas so Iam saying local with my 509 that Iwant to do a cam change Ihad good luck with jim reid, so call me at least if its local you can check on them working on it hahaha. 617 833 3327 call me, Iwish I saw this in oct. rebuilds start at 3500.00 dyno plus 550.00 thats a great price for a freshen up, up grade to hyd roller from flat about 1000 to 1500 extra. my buds doing his old 454s over with them. call me Iwill give you more info, but if you want to travel JC does a good job from what I here.