Offshoreonly.com - Who wants to go to Claudios Friday??

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Northeast US (https://www.offshoreonly.com/forums/northeast-us-222/)

- - Who wants to go to Claudios Friday?? (https://www.offshoreonly.com/forums/northeast-us/255332-who-wants-go-claudios-friday.html)

AHH man I may be able to make it down by car after work , If I can I will!

Quote:

Originally Posted by kreed (Post 3425741)

Hey, we will be going to The Blue Oar around 2 tomorrow, and then to Harbor Park for an afternoon cocktail...come join us! Docks are in.....

JUst look for the BRIGHT YELLOW BIMINI!:evilb:

Quote:

Originally Posted by kreed (Post 3423982)

Frank, I think Studio 54 is going to Claudios on Saturday. Weather lookin better and I have passengers that changed plans just for this day

How was it Kev??? :party-smiley-004:

Mike came over today, figured we'd slam the o-ring in the sea water pump and take the boat for a ride if the weather was nice. Well the weather wasn't nice, so we decided to do some odds and ends (and cleaning) to the starboard engine. Decided to do a deep cleaning! A few hours later we got to the point where it was a lot easier to move around in the engine compartment and things became much easier to clean, especially once you got that big thingy off the top of the engine! :drink:

http://i178.photobucket.com/albums/w...0/8cdfe8fc.jpg

A little further! :eek:

http://i178.photobucket.com/albums/w...0/b31ca48e.jpg

Long story short, went to start the engine after replacing the o-ring. Got about two cranks and the battery seemed dead... except I knew the batteries were charged, so we both though it was hydro-locked. Mike pulled the plugs, sure enough #5 had gold fish swimming in it. Pulled the header thinking we had a leaker, a quick test and it seemed fine. Spun the engine to get the water out and #7 spit out a gold fish or two as well. Figured it had to be a spent head gasket since the engine got hot last time out. A few hours later we find the smoking gun... a crack in the HG between #5 and #7.

Kind of stinks having to go though the BS, but I was planing on doing lifters in both engines at the end of the season anyway. Also got to check everything out on the inside and it was nice to see everything looked great and all top shelf parts as advertized. We actually had a good time doing it... and the BBQ chicken and beer afterwards wasn't bad either! :drink

Thanks Mike, much appreciated! :cool:

Now time for more beer... :drink:

Thats a litte unfortunate that you had issues with a new to you boat but at least you know where you are now and can move forward.

sounds like it was still better than Kevin and Pats day yesterday LOL

were they Orings and copper or were they MLS?

Quote:

Originally Posted by 30ctsutphen (Post 3427016)

were they Orings and copper or were they MLS?

Coated MLS

Fel Pro 1093 - Fel-Pro Wire Ring Cylinder Head Gaskets Details
BB-Chevy

For Pro Stock Buick, Chevy, and Pontiac engines with Chevy bolt pattern

Quote:

Originally Posted by SS930 (Post 3427214)

Coated MLS

Fel Pro 1093 - Fel-Pro Wire Ring Cylinder Head Gaskets Details
BB-Chevy

For Pro Stock Buick, Chevy, and Pontiac engines with Chevy bolt pattern

Big Cheifs!..........Glad you found the source Scot. Lucky it wasnt anything more serious.

cant wait to see this beast run!