Looking for a SuperCat crank
I'm searching for a short-stroke (3.829") Callies Lightweight crank for Merc Supercat motor.
Anyone have one of these lying around? If so, please call me at 313 283-8148. Thanks in Advance, Brian |
Ok, so I'm extending my search criteria... looking for a GOOD crank, with a stroke up to 3.875"
Apparently, those short-stroke Callies cranks in Supercat motors are an oddball cut, and I've broke two of them anyways. Number is above if you can help. Thanks, Brian |
Have you tried JCPERF?
May wanna look at getting the block line honed if it hasn't been already. Seem's weird! |
Weird? Sure is. If was the same motor, I'd be looking much more closely at the block, but they broke in different motors. Yes, they line honed them just to clean up crank bores.
Both cranks broke this season. Any ideas what causes a crank to break? Thanks, Brian |
Originally Posted by p4-33
(Post 2667536)
Both cranks broke this season. Any ideas what causes a crank to break?
Thanks, Brian Good luck. |
Originally Posted by p4-33
(Post 2667536)
Both cranks broke this season. Any ideas what causes a crank to break?
Thanks, Brian |
Originally Posted by p4-33
(Post 2667536)
Weird? Sure is. If was the same motor, I'd be looking much more closely at the block, but they broke in different motors. Yes, they line honed them just to clean up crank bores.
Both cranks broke this season. Any ideas what causes a crank to break? Thanks, Brian |
Leave it to Mercury to come up with another oddball engine part. They could've used 427 cranks (3.76 stroke) instead
|
All times are GMT -5. The time now is 09:18 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.