Re: tomcei winter project
 

A couple more and I'll chill.... :cool:

I was knock'n it out this weekend :D :drink:

Re: tomcei winter project
 

Did you lay out the guages to clear the wheel at all driver angles? Or was it to accomidate the larger size? I have not seen a Pantera dash laid out that way. nice work!! That looks great!! Chris

Re: tomcei winter project
 

Hey Chris, I have some nic nacs for you.

Yes, to both your questions. I wanted to add a different feeling to the helm so I diverted from the straight lines. It took several lay outs before I setteled on this. We discussed some options earlier in the post. I knew I wanted the tach and speedo side by side and I wanted the other small gauges to have a little flow to it. the rest was dictated by the space restrictions on the dash.

I couldn't get stainless angle cut bezzels (Alum only). I decided to powder coat the alum angle bezzels white and then put the stainless on top of that. We'll see what it looks like when I get the gauges back.


Thanks Mike, I still need to install tack and speedo, interior, and adjust drive shifter, make new steering lines and that's about it. I hope to fire it up this next weekend and check for leaks. I made alot of new lines (fuel, water and oil ) so I'll keep my fingers crossed.
Tom

Re: tomcei winter project
 

That dash layout looks great. Is your interior installed yet?

Re: tomcei winter project
 

Thanks, interior should be installed this weekend.

I finished building new steering lines last nite.
Tomorrow I'm starting it and checking for leaks and such.
If everything checks good I will splash next week some time :D :D :D

Re: tomcei winter project
 

Finally cleaned up my mess and finished off the bilge

Re: tomcei winter project
 

very nice looks awesome

Re: tomcei winter project
 

looks awesome , you put alot of time and money in her , I'm sure it's worth every penny and then some . When will you be ready to get her wet ?

Re: tomcei winter project
 

Ya gotta love a guy who takes your old girl and turns her into a first class hottie!
Tom, I love what you did to it .
Unbelievable !
Now its time to go kick some ass with it .
When are you getting it wet ?
You might want to let Albert turn that 540 into a 600CI for next season . I am sure he will take good care of you .

Re: tomcei winter project
 

Hey Jerry,
I fired it up on monday and had two oil leaks. I had two AN-fitting leak at the swivel. I had two new ones sent next day and put them on tonight. I will fire it again on wed after noon. I should have the new tach and speedo by Thurs. If everything checks out on the hose tomorrow she'll be wet on fri night or sat morning. I will post some pics.

YEE HAW :D :D