Re: 28 Sit down is getting a facelift.
 

Its mostly plumbed and Im working on exhaust tonight hope to hear run in boat by the weekend. SPELLING AND GRAMER IS OVER RATED

Re: 28 Sit down is getting a facelift.
 

Brian what is your X dimension?

Let me know about your prop selection too please!!!!

Where are more pictures???:D

Re: 28 Sit down is getting a facelift.
 

Prop is 2 1/4 below bottom without spacer I try to be 31\4 to 3 1\2 I believe Im cut at 21 .Real lose at 3/1/4, but is the fastest but It handles better at 3 1/2

Re: 28 Sit down is getting a facelift.
 

I will hear it run in the boat today will post picts im gona try a 31 6 blade if that dont work I will try a 32 five blade

Re: 28 Sit down is getting a facelift.
 

I can't wait to hear how it runs with the new power. Are you still using the 1.5 ratio?

Re: 28 Sit down is getting a facelift.
 

does your boat have a notch?

Re: 28 Sit down is getting a facelift.
 

oops just saw the pictures...

Re: 28 Sit down is getting a facelift.
 

Brian , Did you get her to the water yet ?

Let us know how you made out with the props .

Re: 28 Sit down is getting a facelift.
 

Pictures And A Full Report Please!!! :d :d

Re: 28 Sit down is getting a facelift.
 

Ok motor is in boat sounds nasty runs good no problems however drive and stering are not ready. Ron asked about hot rod its come a long too.