Foot Rest Dimensions
 

Can someone get me measurements on the footrests?

I basically need the cross section of the right triangle.
Length, height and hypotenuse.

does that make sense?

CLEAR AS MUD but i mesure the part i think you mean back in 5

mine measure 9in up the back 10in out from bulk/H and the ramp measurement is 14in

Thanks Paul.
Any others concur?

...

im going to my boat today i can take some measurements and pics of what i have

i would like to apologize for not getting the deminsions when i was at my boat today. i got a little excited about taking it out for the first run of the year that i forgot to take pics and measure. but the lake was a blast even tho it was 46 deg today on the water!!

No problem.
Hope to get out on mine next weekend.
Should be in NY Monday.

ttt...
Anyone?

Hi Rob i am Q sure i mesured the the section you want , i mesured the triangle at the end of the foot rest i can mesure the foot plate size if you need it i have my boat at my house .

No offense paul, i was just looking for a confirmation.
I'm not sure I'll be able to make mine that high.

The width is not as important, because i can make that as wide as i want.

What i am looking to do is make them out of a hard closed cell foam... like a yoga roller.
The will weigh nothing, and they can be held in place w/ the hook side of velcro against the carpet.
Plus i can move them outta the way, as they will be infront of the cabin entrance.

I'll take some measurements of the boat, now that i have it, and will work from there.

im going to my boat tomorrow i will try it again lol

Thanks Tim.
I just measured my boat and I think w/ the dimensions that Paul has given will work.
Just confirm w/ your measurements, thanks.

Come clean Tim you aint got a tape measure have you !

i had to borrow one from my friend who is a roofer... im a mechanic haha

i was able to take some pics tonight. a little blurry since i was a little tired from doing exhaust manifolds on a ford F-150 today. but you get the general idea

20" wide from end to end
13" tall on the slope
10.5" back to front
8.5" tall

last pic is of them installed in place so you can see how they fit. mine are not fastened in at all. but when i have the carpet in the boat they dont move in normal boating. when your in the rough water your feet keep them in place

thanks tim!
That definitely gives me enough to work with!
Gotta get out on the boat and run it a bit, then decide how i'm gonna want them sized.

where in long island are you? if all goes planned im going to be down there next weekend.

I live in Port Washington, which is north shore nassau county.
boat is in freeport which is south shore almost due south of PW.

Which TG you considering?

i used to live in huntington right off 110 across from the walt whitman mall. the boat is in Islip on the south shore. if i dont grab that one im heading to boston for a bat out of hell boat but we will see how it unfolds

How many boats you have lined up Tim? What does the bat boat look like?

its the 94 in mass

I think I like that one.

This is the one i like ,good luck with your boat buying Tim.

thanks guys! i like the bat out of hell boat to. gonna take a road trip and check them out. im still kicking around picking up a 24 for our low key days on the river up here. i still have the 6 pack boat for now too

Why dont we work a trade out for my 21 single ob boat for the six pack. OF corse i would bring cash too

just cant bring myself to own anything with an egg beater on the back of it. im a traditional big block guy