|
41 Molds
Just seen on FB that the 41ft molds have been bought and are in MI now. New owner is looking into doing a different deck. that would be a totally flat deck design.
|
I saw they sold, wondered where they went. Where are the 36' molds?
|
Who is the new owner?
|
How much did it sell for? |
Unfortunately the only chance that 41 has of being built again is if it were picked up by an established boat builder. With today’s power options to power a 41’ costing hundreds of thousands who is gonna buy a boat that at a minimum would have to be $350k from a no name boat builder with a small chance of survival? Now if one of the big boys picked up the molds and modernized them then yes. But most of the big boys already have their lineup and don’t wanna revamp an old design. With cad and CNC design technology they can build a mold way more precise. But I’ll tell you who would be a good candidate to build this boat, Tuff marine in Canada. He has done an amazing job of modernizing his lineup and making boats super fast. |
out of curiosity, was the 41 ever dialed in? I seem to remember reading that it didn't handle well?? Did they ever build any of them?
|
Which Company in Michigan bought the 41' Molds?
|
JPR Marine out of Michigan
Originally Posted by cougarman
(Post 4711386)
Which Company in Michigan bought the 41' Molds?
|
Where are the 36 molds?
|
Originally Posted by OCCJoe
(Post 4711346)
Unfortunately the only chance that 41 has of being built again is if it were picked up by an established boat builder. With today’s power options to power a 41’ costing hundreds of thousands who is gonna buy a boat that at a minimum would have to be $350k from a no name boat builder with a small chance of survival? Now if one of the big boys picked up the molds and modernized them then yes. But most of the big boys already have their lineup and don’t wanna revamp an old design. With cad and CNC design technology they can build a mold way more precise. But I’ll tell you who would be a good candidate to build this boat, Tuff marine in Canada. He has done an amazing job of modernizing his lineup and making boats super fast. |
Word on the streets is that a quality builder will be doing the layup.
|
Originally Posted by Drock78
(Post 4715619)
Word on the streets is that a quality builder will be doing the layup.
|
Can you even pop a hull from molds that old? Weren't they sitting outside?
|
If they build a boat it will prob one and done. Saber boats in which is a known builder, if I stand correct, Saber still has the 2 boats they built in the past 6 years, No one is buying that many I/O sport boats and doubtful an old name / molds that have been sitting idle for years will be revamped with any amount of sale volumes especially an I/O boat. I hate that its that way but it what it is.
|
Originally Posted by MonkeySea2
(Post 4711382)
out of curiosity, was the 41 ever dialed in? I seem to remember reading that it didn't handle well?? Did they ever build any of them?
Do a search for Panache and you'll see some more info. |
Originally Posted by Griff
(Post 4720684)
I believe 2 41's were built. I think one is over seas and poor shape and the other was a race boat that was possibly damaged.
Do a search for Panache and you'll see some more info. ( 525 staggered 6 drives) |
| All times are GMT -5. The time now is 12:46 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.