Palm Beach March 22 thru 25 stop in and see it !
 

We will be showing the classic 38 Offshore with twin 600’s and a lot of new features along with the new 23 S.U.V at the Palm Beach show (March 22 thru 25th). The Powerplay booth will be at the end of Fern Street under the traffic light. Please come and show your support, as Tom Mason and I will be there. Drop us a line and let us know you are coming.

We have on the drawing board an Openfish version of the 38 available with stern drives or outboards. We tested this theory by rigging one of the original 38’s with triple 275 Verado’s. We could not have been more impressed! We hope to have this boat completely rigged and ready to run in some of the poker runs this spring.

If you have any questions or are interested in being one of the first to own the next generation of Powerplay’s, please feel free to email me at [email protected]. Have a great day on the water and we hope to see you all in Palm Beach!

Cant wait to see it! Also, would love to share a few ideas with you...

Our ears are always open for ideas!!!!!
 

Glad to hear you will be there tell all your friends.....

Got any pics of the boats that will be on display? Company website?

Pics
 

We our working on the web site wating for a few things it all takes time..
We are saving the best for the show..
See you at the show
[email protected]

I will stop by and check out the 38 on Friday.

38 looks good! Scott said it should run around 87MPH !!!

any body get pics from the show

Any more pics guys, Im glad your bring back this 38 model.:cool:

How much for 38?

Im lovin that 38. :cool:

I do too, but reserecting them to start out needs to be somewhat affordable to get them out in the public again. Then they need to be tweaked, also need to be as good or better with some of the new hardware out there than when Dan owned the co. I see alot of potential for this model, it is a very large 38 and with swim platform a 40'6" boat. Does anyone know the ACTUAL headroom at the tallest point in one of these. Thanks Jeff

Ya I hear ya.

How about a staggard 38?

38 PP Specs
 

Jeff, Headroom is 6'4" in the main area as you step into the cabin, going forward to the first bulkhead. The engine compartment was tooled to allow a short engine stagger, but it really is'nt neccessary.

Thank You ED... Do you also know if the first bulkhead is around the countertop or door to the head. Also do you know if there is appr. 6' headroom in the head as well, and possibly 5' in the sitting area. That is excellent for a 38' boat plus swim platform. Thanks Again. Jeff

:cool: :cool:

38' Cabin Headroom
 

The first transverse bulkhead is at the front of the U-shaped lounge area, which is quite a ways forward of the head & companionway door entrance. Both the bathroom(head) wall enclosure on your starboard side, and the tall closet/galley countertop structure on your port side, are tooled as one piece with the entire cabin liner. The top of these DivinyCell cored wall enclosures are bonded to the deck, both inside & out, with 1708 Biax material...giving deck support in those areas. This allows plenty of headroom in the entire main salon area. There is a step up into the head(due to the stringer thats just below it, that we refused to compromise the height of), that lessens the overall interior height to approximately 5'10". Overall, its a nice cabin for a boat in its class. :)

So are these guys going to be building new 38's , we have not heard from them in a long time.

I actually think these are awesome models, I even inquired about one last week to see appr. how much since my 4300 just sold. Still waiting to get the second call back on what they could actually do. Im ordering another, actually my 3rd 4300 Nortech this morning. Jeff

Ed, thank you by the way for all the info, Jeff

They are awesome and a large38. The amazing thing is that they run about the same speed as the 33 with equal power.:cool: