38 PowerPlay at Miami
 

Was curious if anyone who went to the Miami boat show saw the new 38 PowerPlay ? Did they get it done ? Did anyone get a chance to ride in one ? If so what did you think?

We visited the factory in December and they were hopping to have it completed by the show and was curious if it made it and how it looked. When we saw it at the factory they were finishing the cabin liner plug. The boat really looked great; nice lines, excellent amenities and room in the cabin, great engine access etc. Looked to me like they really did their homework.

I didnt go this year, wish I could have made it, but my buddy said the boat was not painted but looked great, when he looked down the side it was as straight as an arrow, Im looking forward into seeing some out in poker runs this year.:D

Very nice boat. They really put lots of pride and attention to detail into the PP38. I have not seen it in the water but the one at the show was a masterpiece and priced with 500EFI's probably the best value/quality combo.

the one i saw had big horsepower...what is a 500 EFI 38 going for?

BAD ASS
 

I was at the Miami show and got to see the new 38' powerplay and it was HUGE!! I agree it needed some paint, but the guys at Powerplay really have another winner here. It was quite a site to see. It was good to see Dan and John again. I didn't get a chance to get a ride since it was in the convention center, maybe next time.

Hey Dan and John, good luck to you guys on your 38, what does it run with 500 efi's or say some 725 hp mills. Thanks.

:) I hope this attached file made to this thread, there is no paint but you can see the lines on the boat, Robbie

I WAS AT COBRA LAST WEEK AND RANDY SAID THE NEW 38 POWERPLAY RAN 94 MPH WITH TWO COBRA 725 HP ENGINES. THE 500 EFI'S SHOULD PUSH IT CLOSE TO 80!

The boat was overpropped and the engines only turned 5000 rpm's.
Engines should turn 5800 rpm's.. You do the math.

PP RACE is dead on with the info, Dan was out today and had another water leak in the drive and again the props were to big. So one more day to wait for the #'s with the RPM's up were they belong! Robbie