Looking for Ed's number...
Have a 25' PowerPlay and want to install a new SeaStar steering system. Short of a number, does anyone know the name of his shop?
Thanks! |
PM him, he's good at answering :)
|
Thanks! I *thought* "Ed" was somebody else. After reading a few posts, I realized this was Gar. Not the same person I was looking for, but as PP owners, we're lucky to have him here. I had the privilege of meeting him at Danny's shop several times.
|
Originally Posted by XSNSX
(Post 2563580)
Have a 25' PowerPlay and want to install a new SeaStar steering system. Short of a number, does anyone know the name of his shop?
Thanks! |
Built in 1991, this was one of the original 25' PowerPlay Boat Show boats. The first owner, a gentleman in his 50's, kept it in high & dry storage and accumulated 400 hours of use over the 12 years he owned it. The boat was still in the same condition as the day it was delivered from the factory.
In 2002, he sold it to a buyer in Lauderdale who turned the boat over PowerPlay to have it completely updated. This included the new Pirelli floor, new dash, new Gaffrig gauges & bezels, new stereo system, etc. The guy used the boat for 50 hours and wanted to move up to something larger. I bought the boat less than a year later (this was in 2003), hung a new pair of 200 Opti's on it, updated the graphics and have used it very little since then. It still has the original Hynautic steering system, which doubles as a work-out at the gym... thus, the reason for this thread. Here's my boat... http://www.yachtforums.com/forums/im...Shot%20NET.jpg http://www.yachtforums.com/forums/im...ay/DashNET.jpg |
If anyone is interested, I'm thinking about selling it. The boat is located in Jupiter, Florida. It has a full cover. The boat is flawless. Seriously.
|
what kind of speeds are ya getting with that power?
Are you lookin for the Ed that has/had the shop that was doing 5 axis CNC stuff? |
Do you have a pic of the back with the engines. Seastar steering is an easy install.
|
Originally Posted by Wally
(Post 2565132)
what kind of speeds are ya getting with that power?
Are you lookin for the Ed that has/had the shop that was doing 5 axis CNC stuff? And yes, that was the Ed I was looking for and found. Spoke with him yesterday and am turning the boat over to him in a couple of weeks to install the SeaStar system. |
Originally Posted by northernoffshore
(Post 2565259)
Do you have a pic of the back with the engines. Seastar steering is an easy install.
|
All times are GMT -5. The time now is 03:39 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.