Sorry to hijack,,,,,,,did uever get the boat back ???
Did they find it? I forgot.:party-smiley-004:

A real lesson....watch where you store a boat in S. Florida (it was stolen the day after it came out of rack storage).... yes, I found the boat through help from Offshoreonly and the hull is fine. No motors, no drives, etc. Luckily (and I use the term loosely) they were very careful the way they took it apart. The most frustrating part is that we know who ended up with the parts and so do the police - the big question is if they will ever act and make an arrest...

WOW,,,,:eek:

Lets say we dont use extensions boxes anyone know how they work without them

I think u need to try it,,but guess u should be ok.
If u would be to high,,u can always space down.:party-smiley-004:

I just did it without boxes. Boat was faster but harder to plane. I would reccomend only going up 1" if you have a Pre-95 boat like mine. I'm not sure what the post 94 boats will do since they have more weight in the back.

Frank

[QUOTE=ls1nova;2898685]I just did it without boxes. Boat was faster but harder to plane. I would reccomend only going up 1" if you have a Pre-95 boat like mine. I'm not sure what the post 94 boats will do since they have more weight in the back.

Frank[/QUOT


If you purchase a 2inch shorty can you install a spacer to make it a standard high or does it need to be modified . My boat is a 99

at that point it would not be worth it to have that much $$ in hardware back there. Just sell them and add nose cones.

Frank

[QUOTE=Goin Nuts;2898871]U just need to cut the spacer in the back,,thats all.
But its not a problem.
U can get any length spacer up to 2 inch .
they come in 1 and 2 inch but u can maschine them any thicknes.
On race boats we do it all the time to get it perfect.

Are you going to put it back together? Feel awful for you