Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerplay (https://www.offshoreonly.com/forums/powerplay-52/)
-   -   Wind Deflectors-Parts?? (https://www.offshoreonly.com/forums/powerplay/243132-wind-deflectors-parts.html)

Goodwrench 11-26-2010 06:09 PM

Wind Deflectors-Parts??
 
I just purchased a 33ft sport deck 2 months ago and I am looking to do some upgrades this winter. Some of the things I cannot locate is wind deflectors, swim platform, etc. Anybody out there that can help or have advise???

glen george 11-27-2010 09:14 PM

1 Attachment(s)
www.finneys.com wind flaps I found these early cigarette pop up wind flaps.

302Sport 11-30-2010 11:19 AM

i would have a celar lexan one made that bolts behind your gauge panel like the newer boats.

Goodwrench 12-03-2010 11:47 PM

I was thinking about going with a complete windshield if possible instead of the pop up wind deflectors. Do you have any pics of the windshield you have on your powerplay ? if so please post a pic. I read somewhere that the short clear windshield off a 33 outlaw would work? anybody tried or heard of that done?

thirdchildhood 12-04-2010 09:52 AM

Another option that I use: http://www.windaway.com/

302Sport 12-04-2010 11:09 AM

i dont have one on mine but if you look at the active thunders, they have a clear plastic one that runs all the way across. it would be pretty simple to do on a PP. Just take off your gauge panel, have a lexan piece made to the same dimension and with the same cutout as your gauge panel, but 3 inches taller, or however tall you want it. then sandwich it in between the dash and your gauge panel.

rlj676 12-04-2010 01:26 PM


Originally Posted by 302Sport (Post 3266782)
i dont have one on mine but if you look at the active thunders, they have a clear plastic one that runs all the way across. it would be pretty simple to do on a PP. Just take off your gauge panel, have a lexan piece made to the same dimension and with the same cutout as your gauge panel, but 3 inches taller, or however tall you want it. then sandwich it in between the dash and your gauge panel.

This is a really cool idea. You could also heat and give it a slight bend..... :drink:

302Sport 12-04-2010 01:41 PM

its simple and a lot of the new boats are using that style....

302Sport 12-04-2010 01:57 PM

look through these pics and on the one of the dash if you look close you can see the clear plastic....

http://www.activethunderboats.com/37.html

ls1nova 12-05-2010 09:58 AM

This is the only shot I could find, but I just had one mad from acrylic and bent to fit. There is a 2" flange at the bottom where is screws to the deck. I took my flip up wind screens off and installed this. What a world of difference! Out on water you have to look for it to know it's there.

http://images5a.snapfish.com/2323232...%3A93348nu0mrj


All times are GMT -5. The time now is 10:27 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.