Tom purchased the 33' Sportdeck, 33' Sportfish, and the 38' Sportdeck molds at the auction.

Allstar Marine

http://i41.tinypic.com/i4eaec.jpg
http://i40.tinypic.com/2knibd.jpg
http://i39.tinypic.com/t5omzs.jpg

That is one classy 38' Powerplay. Awesome color combination.

J, *135 inches from inside the transom to the dash board bulkhead. To do staggered motors we need approx 80 " of motor box. Each bolster needs at least *24 inches front to back plus room to get in and out . It can be done but you would have to give up some cabin space which we could do with a temporary insert in the mold. Also, there would be lots of custom work on the *cabin door, floor, etc. a new motor box mold and you might have to give up some fuel . Also I'm not trying to make any money here but it will cost an additional $30,000 to $35,000 *for the custom glass work and *take about 6 to 9 months

Tom, if and only if I was to do anything I would want a 6pk with the front bolsters and 3 holes in the back plus a cabin. And I would do my own power. I work with another builder and am very aware of the cost to do a boat similiar to what I want. I can rig it and do anything myself. The comment I made about a 700sci stagger was if I won the powerball. That said I really hope you guys can sell some boats and pull it off. I really would like to see one before I would do anything. But now that someone has the molds and are willing to do boats I am not opposed to seeing what you produce and might be willing to do a blank hull for the right $$$.

Subscribed..., the 33' sport fish looks great! A 38' sportfish... can't imagine...,

OSO Steve owned the 38 for a while
It sold and partial sunk after I think?
Maybe why it was rerigged

No wrong boat, Steve bought the black 38 (hull #4). The blue boat is #5 and the original owner still owns it. He just wanted to go faster! :D

Here is Steve running with DT42 and I think it was his brother's boat.

http://i13.photobucket.com/albums/a2...dDT800x600.jpg

Cool pic Dave. thanks for sharing