|
https://cimg2.ibsrv.net/gimg/www.off...99dc321cc.jpeg Running with Brian and Jennifer Bowen in their ‘96 on Friday. https://cimg3.ibsrv.net/gimg/www.off...8f15b7659.jpeg Stopping to visit John Stern on Friday. John Lewis’ ‘89 is up front, Brian Bowen’s ‘96 in the middle, and my ‘97. https://cimg4.ibsrv.net/gimg/www.off...149a5365b.jpeg Docked at Captain Ron’s. https://cimg5.ibsrv.net/gimg/www.off...e80ded459.jpeg Waiting to run. |
Boat looks nice, good to see you finally bought one.... sorry don't remember you name you stopped by the house and picked up some EFI stuff for a bud of yours, solid run on course
Ken |
Originally Posted by F-2 Speedy
(Post 4704105)
Boat looks nice, good to see you finally bought one.... sorry don't remember you name you stopped by the house and picked up some EFI stuff for a bud of yours, solid run on course
Ken Hows the Cig? |
Hey John, had a couple issues at the Cig event with the new engines but Myrick and I got it sorted.
|
What’s the setup in that boat? I,too, am .8 mph away from 90! |
Originally Posted by AWOL
(Post 4704186)
What’s the setup in that boat? I,too, am .8 mph away from 90! SSM-IV’s 2” spacers 17-1/2” 31P 4-blade cleavers spinning out I still need to fine-tune it. How about you? |
Originally Posted by Keytime
(Post 4704199)
700hp 580’s SSM-IV’s 2” spacers 17-1/2” 31P 4-blade cleavers spinning out I still need to fine-tune it. How about you? I’m now trying out regular Mirage 29s but just recovered from a bent exhaust valve and haven’t pushed it to the max yet. I also turned the timing back. I found an old thread with Ed posting about Powerplays like the drives toe-out 1/4” (spinning out). Mine were 1/8” toe in and noticed an improvement when I adjusted it. Maybe check yours during the fine tuning if you haven’t already? |
Keytime, where are your drives in relation to the bottom surface with the 2" spacers?
|
Originally Posted by AWOL
(Post 4704212)
I found an old thread with Ed posting about Powerplays like the drives toe-out 1/4” (spinning out). Mine were 1/8” toe in and noticed an improvement when I adjusted it. Maybe check yours during the fine tuning if you haven’t already?
|
Originally Posted by frickstyle
(Post 4704245)
Keytime, where are your drives in relation to the bottom surface with the 2" spacers?
|
| All times are GMT -5. The time now is 01:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.