Originally Posted by rexone (Post 2096839)

We did discontinue the boxes, for 2 reasons.

1. We have a new actuator (that is not an import) that runs approx twice as fast as the old one. Result, no box needed.

2. We were having quite a bit of quality control issues with the relays we were getting resulting in some failures. I don't like failures or iffy products. Everyone has access to the same relays. We tried all that were applicable and less than satisfactory results. Jump to end of story... box discontinued because we don't manufacture our own relays and #1 above.

Another fix for older rams is usually to simply rewire them to the dash using 10 gauge wire. The small wire many factories use simply won't pass the juice and results in a severe voltage drop to the motor (the whole accel box purpose). If the motor itself is good this usually fixes the problem. You can easily test it first before rewiring clear to the dash.

Originally Posted by laszlo01 (Post 2101926)

I just installed one from eddie marine and my hatch goes up in like 5 seconds wow what a difference. Gotta have one for the powerquest, hopefully the factory decided to install these on the new boats.