Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Powerquest (https://www.offshoreonly.com/forums/powerquest-49/)
-   -   Anybody done any upgrades for this season? (https://www.offshoreonly.com/forums/powerquest/182597-anybody-done-any-upgrades-season.html)

johnny b good 03-20-2008 07:00 PM

Anybody done any upgrades for this season?
 
Always nice to read and see any upgrades Powerquest owners have done or planning on for the up coming boating season. I plan on installing Hardin marines swirl away sea strainers and the J.L. audio 7.7 speakers and amp to compliment there 10" sub & amp I did last year. Plus a few little things.

boatnt 03-20-2008 08:16 PM

1 Attachment(s)
took the boat to Mitcher T for some new graphics

johnny b good 03-21-2008 08:21 AM

Very nice, were some of or all the old graphics removed or was he able to go over the originals? Is your boats original graphics in the gel coat or was it when they switched over to paint?

ckentling 03-21-2008 09:30 AM

Only upgrade is trying to make the 290 find a new home so I can move up to a 38 :cool-smiley-027:

but did a lot last year :D

Shawn D 03-21-2008 10:01 AM

Doing the same. I just recieved a down Payment on my 230 Conquest. Pending sea trial (Boat Ride) when the ice leaves. Next friday & sat were driving around looking at 34's

Last year a new potty and Batteries & her trailer got new tires.

pkspx 03-23-2008 11:05 AM

Powerquest is heading to Doller Offshore here next week for some interior work plus salt got inside the drive and is effects using reverse on occasion, getting tired of it err so gonna have them fix that. Other then that she's been running real nice haha you snow suckers!

Perfectmix 03-24-2008 09:29 AM

3 Attachment(s)
Mills are out for couplers, and replacing the hot water heater. Nothing exciting just p/m work. It would be nice to install about 150 more hp per side :D. Anyone want this thing??

johnny b good 03-24-2008 02:38 PM


Originally Posted by Perfectmix (Post 2497179)
Mills are out for couplers, and replacing the hot water heater. Nothing exciting just p/m work. It would be nice to install about 150 more hp per side :D. Anyone want this thing??

Keep the pressure on my friend Mark Kuta, which you have talked with.
I keep telling him to go look at it.

speedreeder 03-25-2008 01:13 AM


Originally Posted by Perfectmix (Post 2497179)
Mills are out for couplers, and replacing the hot water heater. Nothing exciting just p/m work. It would be nice to install about 150 more hp per side :D. Anyone want this thing??

Are you trying to sell? post some pics, or send them to me. How much? Gen.?

Perfectmix 03-25-2008 06:32 AM


Originally Posted by johnny b good (Post 2497643)
Keep the pressure on my friend Mark Kuta, which you have talked with.
I keep telling him to go look at it.

Thanks for telling him about it, I wondered if he was friends with someone from this forum. Where do I send the commission check :D


All times are GMT -5. The time now is 02:11 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.