![]() |
Redoing my cockpit interior
Guys
Can some of you that have 290's thur 380's post pictures of your interiors. I am going to redo my 380 and I want to update the look. Thank You Wildman 1 |
1 Attachment(s)
Attachment 497457
Lots of junk onboard too. |
|
My friend had the factory colored stripes done in a carbon fiber pattern in his Avengers cockpit upholstery, very nice look.
|
Thank's Guys
Got my price today for doing the whole interior plus replacing the carpet in the cabin. After 13 years it is worn down really bad. All my vinyl turned yellow over the years plus I made the mistake of using armor all on it. I am changing the color pattern a little to take away from some of the all white look. I had teal on the head rest on the bench seat now we are going teal and magenta and wrapping that around the sides. Plus we are going to stripe the seats in teal and magenta. Head rest on the bolsters will be teal with the Power quest logo stitched in pink thread.
We are going to put bands of color in the cabinet to breakup the white bench seats as I already have teal at the top corset. Panels coming down the wall stay the same but the first panel on the seats change from white to teal then white ending up in teal on the final panel closest to the teal floor again. This should breakup the all white cabin. Anymore pictures will be helpful. Wildman1 |
1 Attachment(s)
Have you considered changing out the side panels to the later style padding...or even design your own?
I would like to install newer style McLeod bolsters (rounded) and match the headrests on the sunpad. I think that would really update the looks of the cockpit...I just have too many other projects planned right now. |
Originally Posted by Need4SpeedGTCS
(Post 3899720)
Have you considered changing out the side panels to the later style padding...or even design your own?
I would like to install newer style McLeod bolsters (rounded) and match the headrests on the sunpad. I think that would really update the looks of the cockpit...I just have too many other projects planned right now. |
Let us know how it turns out! Is it going to be done in KY, or FL?
Dave |
Guys
Does anyone know when I can get the vinyl numbers or manufacturer so I can match the purple,teal and magenta on my boat? We got all the parts out and are ready to order the replace vinyl. Using a heavier vinyl 28 oz weight. Going with a whiter,white as shown on the later models like in the classified section. Got the carpet match up but having trouble with the colors mention above. Steve |
| All times are GMT -5. The time now is 07:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.