Bolster Foot Rest
 

Question?????? Do they make a foot rest for the passenger side bolster that can be added??

Foot rest
 

My foot rest for the passenger side bolster, bolts to the wall between the cockpit and cabin, in front of the passenger.

Did that come from the factory?? Or did you add it later??

I added one on the drivers side I think it was about $120.00 I had to buy it through a dealer. I am sure you can put one on the pass side.

came from PQ that way, I think it was part of the comp package.

I added them on both sides on my 260. Call Powerquest and they give you a dealer that you can order it from. It was a little over 100 bucks each side.

Hey guys received my foot rest from PQ today. Question the one you guys purchsed was it just a stainless tube in an L shape?? I was thinking of a wedge shade glass rest that would mount to the floor?? If its the same one , have you had any problems with stress cracks?
I see I'll need to put a large backing plate.

Thanks

That's the one. I made backing plates out of stainless steel for both ends. I have no stress cracks yet and my son stands on them. I also used stainless bolts with nuts not screws. Have someone sit in the seat and mount it where it feels best.

Thanks Gary. How far off the floor did you mount yours? I see you have a 26 and I assume the shorted bolsters as my Conquest??

Thanks Brian

Brian,
I have stand-up bolsters in my boat. I'm pretty sure they're the same height as the other Powerquest models. As far as how high I put mine, I'm thinking around 8 inches or less. I'd have to go out in the boat and measure and get back to you. But like I said before have someone sit in the seat and you hold it where it feels most comfortable to them. Then mark the holes.