profile 29v
 

Hi new to this site, I,m looking at a 29 profile for sale any info on ride, quality ,or things to check would greatly be appreciated. I did try searching but not much info about these boats thanks in advance Bob.

My opinion, pick another manufacturer.... Poor build quality, sketchy handling.

Again just my opinion.

Get a hold of Drock78 he had one with a 525sc in it

Thaks for the replys , after a little more research everybody told me to run from this boat so I went a different direction thanks .

Wise decision

Smart

Just wondering how many of you have owned one? Love mine

Don't need to own them when your buddies do and you get the "profile experience" up close and personal.

Good to hear yours is working out for you tho.

I've seen many older Profiles that certainly aren't junk as some of you guys seem to imply. Maybe the Owner wasn't the most reputable builder but please, many of the Profiles out there have held up very well over the years and the 28 cat was a screamer that held it's own.

Love mine, running a 572 blown Merlin, no chime walk, very nice ride at wide open throttle, will keep up with any single engine and most twins, at a lower cost . Too bad the owner of the previous company changed the way people think of Profiles.

So tell me, what years are the "good" profiles? Been around/in a 94' and a 01' and I feel the same about both.

I respect your ownership of one and opinion of it. Sadly its not enough to get me to recommend one to anyone.

The quality and fit & finish of the boats that were built in wisconsin was much much better. That would be starting in 2004. Before 2004 they were manufactured in Sumner Iowa.

Mine nose steared so bad it was scarry almost flipped it one day upgraded to a 30 formula much happier

I know a guy with a 2003 33 profile with Art Lilly rebuilt 500 efi's and the boat runs strong. The shamful part is the boat is in rough shape due to the owner hitting hard times. Runs true 85 all day. He's selling it for cheap but it needs tlc. What a shame.