Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   Cleaver To Lightning (https://www.offshoreonly.com/forums/prop-talk/137643-cleaver-lightning.html)

z.zuperboat 08-11-2006 08:00 AM

Cleaver To Lightning
 
Brett Is Working On A Project For Me Converting A Monster 18 Inch 3 Blade Cleaver Into A Bowlifting BI-CH For My Single Engine Application. It Will Look Something Like A Lightning . Who Thinks It Will Work. If Anyone Can Do It Bblades Can. Time Will Tell. Who Knows Speedmasters And What Do You Think ? I Will Post Results When Finished .

lightspeed 08-11-2006 09:05 AM

Re: Cleaver To Lightning
 
Think It Will Break 50

z.zuperboat 08-11-2006 09:07 AM

Re: Cleaver To Lightning
 
jOHN THAT WAS YOU IN THAT BIG CAT THE OTHER DAY ?

kvogt 08-11-2006 12:14 PM

Re: Cleaver To Lightning
 
I have an old heavy cigarette 38 flat deck with Arneson drives on it. I run Hoss props reworked by Bret and Bob, they lift the bow so much better than cleavers it is not comparable. As added benefit they are around 5 - 7 mph faster than the cleavers.

Thanks BBlades for the recent quick turn-around on my prop.

Kris

bbladesprops 08-11-2006 05:05 PM

Re: Cleaver To Lightning
 
As always Kris, your welcome!

Did you slash the new prop yet?

IRONMAN 08-15-2006 03:23 PM

Re: Cleaver To Lightning
 
Keep us posted, I am interested in what happens. I have found that just going from 17 diam to 16.5 made a very noticeable improvement in bow lift. Slippage increased some but the control and handling is much better. Chris

z.zuperboat 08-16-2006 06:31 AM

Re: Cleaver To Lightning
 
My 4 Blade Started At 17 Then Cut Down To 16.5 With Negative Results Then Back To Mercury Again To Try More Mods, Cut Down More To 16 With Some Tip Work And Still No Good Resluts. So After Being Charged Twice Still With Negative Results I Was Done With Mercury. Not Knowing Brett Was Gone My Fault!!! Got The 3 Blade Back Yesterday And Looked Very Impressive. Thin, But Not To Thin. I Should Have Results By The Wekend.

z.zuperboat 08-18-2006 05:59 AM

Re: Cleaver To Lightning
 
Ok We Have Some Results On The New 17/34 3 Blade. ( First The Good ) The Boat Picked Up 4 Mph. Also Picked Up 300 Rpm. I Still Have Some Room In The Rpm Range That Mite Help. ( The Bad ) Lost 6 Mph In The Midrange And The Slip Went Up From 17 To 18 If My On Line Prop Calculator Is Correct. All In All Prop To Prop Brett Gave This Prop On This Boat A 4 Mph Gain. Thats A Thumbs Up In My Book.

bbladesprops 08-19-2006 08:06 PM

Re: Cleaver To Lightning
 
Awesome, glad to hear we gained the top end. That's what we were looking for. Mid range and top speed don't always go to gether. I wish that wasn't so.

I got your call message. We'll talk next week.


All times are GMT -5. The time now is 06:32 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.