Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   Prop advise for a 35 Fountain (https://www.offshoreonly.com/forums/prop-talk/141983-prop-advise-35-fountain.html)

35 White Lightning 10-04-2006 09:45 AM

Prop advise for a 35 Fountain
 
When I bought my 1995 single step Fountain 35 Lightning it had a pair of Mach sterndrive 26p 4 blade props on it. I have the original preformance test when the boat was new and it showed 14.5 27p 4 blade I assume these are hydros. Any sugestions on props I am running bone stock 502MPI's and with these props the motors will only turn 4500rpms at about 74mph on speedo

bbladesprops 10-04-2006 02:22 PM

Re: Prop advise for a 35 Fountain
 
What props are on it now? The 26's or the 27's? What is your gear ratio?

It seems you are hooked up real well. You may need togo down in pitch to get the desired rpm.

throttleup 10-04-2006 04:22 PM

Re: Prop advise for a 35 Fountain
 
Fountain Performance reports are typically pretty close with pitch (speeds may be another thing ) but prop pitch and RPM are usually correct from the factory. I haven't seen Reggie miss the mark like that. I am assuming that at 4500 RPM you are trimmed for speed, correct? I think you may also want to consider verifying your data. Your tach has some time and age on her now as well. I just don't want to make a recommendation that sends you off chasing ghosts with your dial in work. It may just be that you need to reduce the pitch to increase your RPM.

If you can give me your gear ratio and speed via GPS we can take a look for you.

Julie

MegaByte*3 10-04-2006 04:30 PM

Re: Prop advise for a 35 Fountain
 
On my '99 35 single step w/ 502 magnums I ran 23 P Mirage plus props. I got 5100 RPM and almost always saw 78-79 GPS. On a few occasions, with light fuel and passengers, I saw 80.3 on the GPS.

Hope this helps.

T

articfriends 10-05-2006 10:59 AM

Re: Prop advise for a 35 Fountain
 
Would a mach stern drive 4 blade have 15 1/4 dia like a bravo? I see the 27's were 14.5 dia,wouldn't that make a big difference? Did boat origanally have 1.50 drives and maybe get changed to 1.36s along the way? Smitty

Ran-Dom 32 10-05-2006 11:35 AM

Re: Prop advise for a 35 Fountain
 

Originally Posted by MegaByte*3
On my '99 35 single step w/ 502 magnums I ran 23 P Mirage plus props. I got 5100 RPM and almost always saw 78-79 GPS. On a few occasions, with light fuel and passengers, I saw 80.3 on the GPS.

Hope this helps.

T

those are some strong running 502 Mags :rolleyes:
My '99 Single Step 35 never seen a real 80 when I had stock 500HP's . Never heard of any late 90's Fountains running 3 Blades :confused: (and your ratio had to 1.36 to be anywhere in the ballpark speed wise)

INDY27 10-06-2006 06:37 AM

Re: Prop advise for a 35 Fountain
 
The ratio was/is a 1.36. ;)


All times are GMT -5. The time now is 11:14 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.