![]() |
Julie Throttle up
Julie
I just tested my 25p lab finished prop from you. I also just installed the new dana flow torque exhaust. Im running 67MPH GPS @ 4800 rpm . Do I have anything left. Its a 23 outlaw with a 496 mag and bravo 1 1.5 drive. |
I will pull your info tomorrow and take a look.
Julie |
Julie did you forget about me?
|
Can I ask:D
What RPMs and GPS before having the prop labbed? |
Call me at the lab tomorrow, 727-531-2255 and we can go over things.
Julie |
Originally Posted by 1BIGJIM
(Post 2145337)
Can I ask:D
What RPMs and GPS before having the prop labbed? |
Very Nice! A 3MPH increase is very good for a Baja, or should I say any conventional Deep Vee hull. Your motor needs to run at 4800 zRPM at WOT so you have arrived. Congrats!
Julie |
I don't want to throw a fly in the ointment but, you picked up 2.4 mph and 100 rpm with two adjustments. Exhaust and what ever prop work was done.
My point is, do one change or upgrade at a time. It is difficult to determine what worked and what didn't do much. I'm surprised the exhaust didn't give you more rpm on its own. You can actually run those motors right to the 4950 limiter without anything but performance gains. |
I added the dmp exhaust and went from a 23p non lab finished mercury mirage+ to a 25p lab finished mirage.
|
| All times are GMT -5. The time now is 12:53 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.