![]() |
Best Props for 35 Fountain???
Boat is a 1996 35 single step with 502 power. Performance report says they ran a 27. But should I be running a rounded ear or a more clever looking prop. I am running the round ear and with alot of trim I get a little over 5000 rpms.
|
My 2001 single step came with a hydro quad !Vs, 26s. I think it turned 4900.
|
What speeds were you seeing?
|
Your boat was most likely delivered and dialed in with semi-cleavers, Hydromotive props.
Julie |
With the 502s, the Reggie report was 75. I never quite saw that number in real world application.
|
My 1999 with HP500's came with 28p QIV's,...but the boat also had factory-installed stellings ext. boxes. The "Reggie Propaganda Page" reported 85 mph @ 5350. I got about the same on good days. Carder
|
Do you still have same motors? Those are good speeds with 500s! Must be something to those extension boxes.
|
Tyler rebuilt both engines this winter, up to 585 hp and similar torque ft/lbs.... but I have had engines and drives grenading every time I get a chance to see what it is capable of running... I am thinking 91 to 93 with the upgrades and Julie dialing in the props... I am going out tonight to trial them.
Carder |
Keep us posted. What broke on your last drive? And, you broke the drive trying to get on plane?
|
Bearings grenaded, but not getting up on plane. I was slowly testing at 3500, then 4000, then 4500... I stopped to inspect and the stbd. shut down. When I got it restarted there was a 'wurring" sound coming from the drive when I put it in gear... so I took it back to Tyler. Tomorrow he is reinstalling the drive. The props from Julie rocked up to the 4500 mark...
i am very curious what happens beyond that and will respond ASAP. Carder |
| All times are GMT -5. The time now is 08:48 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.