5 blade prop guess
 

Someone get me close: W/5 blade
32' Velocity 700Hp Mercury supercat engines X 2, 6000 rpm, xr's 1" shorties. Boat weighs less than 7000#

Do you have a base line set of numbers?

Brett, not for the new engines, I had 496 HO'S bravo one 4 blade 15 x 30 pitch, 5000RPM @ 80mph

I have a boat/power very simular to yours....but if your boat were mine, then I would probably try an untouched Hydromotive a 30" or 32" P5X (5-blade) for a baseline start. My disclaimer is that I am not a prop/boat expert, but that is where I would start. ;)

Had a heavier boat, 38 Fountain, with 600's and shorties, but the revlimiters set at 5300. We ran 32 pitch 5 blade Maximus. With a higher redline, 32's should be a good place to start.

I found some 15.25 X 33 6 blade herings would this get me close or not at all.

VV, Keep your money in your pocket until you are ready to run the boat, then call Brett at BBlades and let him send you some demo props. Their demo/trial deal is real reasonable, and you won't end up with a bunch of props that don't work.

That's the best advice I have got so far. I did find out from Matt the 33p 6 blade won't work for me.

The chances of you surviving prop testing is pretty minimal :)

Twin 700 supercat engines in a Velocity? Wow. I had 575 a side in a 30 and got to see God a couple of times. 700's should be unbelievable.

Chris, X-LAX @ WOT
http://i265.photobucket.com/albums/i...20/22912_2.jpg
http://i265.photobucket.com/albums/i...y320/22912.jpg