![]() |
29 six blade herrings
any one looking for a set ,xr shaft 15 1/8 diameter very nice compatible to 32-33 labbed bravo 30 p5x ,4mph to 5mph faster my slip went from12% to 7% mid range is 11 mph faster call Bob 4127810881 first 2800.00 goes,faster
|
Just curious, how much were these props new? I'm running labbed P5Xs 31s now on a standard bravo shaft.
|
4000.00 try to get aset at least 2 month they wont work on small shaft they are solid hubs, who labbed your p5x,s and what was the gain
|
Bblades labbed them. I had them labbed the first time last year. After labbing, they ran the same rpms, and accelerated better. I only picked up about 1 mph, but to Brett's defense this test came in the heat of summer. I had him lab them again to try to pick up a few more rpms, haven't been able to test them as of yet. Took the difuser ring off, big mistake, Brett is in the process of re-installing them.
|
Originally Posted by crayolacrazy
(Post 2564599)
any one looking for a set ,xr shaft 15 1/8 diameter very nice compatible to 32-33 labbed bravo 30 p5x ,4mph to 5mph faster my slip went from12% to 7% mid range is 11 mph faster call Bob 4127810881 first 2800.00 goes,faster
What hull were these done for/run on? And why are you selling them? |
they came off of a 42 fountain I ran them as my rough water props on a 33outlaw with twin 800whipple motors I have 6 different sets of props that all work on my boat,how many do I need? My motors make over 800lbs of toque at 3500 rpms and with those 29s my slip went from 12% to 7% thats to hard on my drives 5blades are more fogiveing
|
| All times are GMT -5. The time now is 09:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.