|
Originally Posted by bbladesprops
(Post 2601031)
If the gear ratio is 1.35:1, the slip is 9%. That is very good. You need to raise the rpms by decreasing pitch. It is hard to believe you can only turn 28 inches of pitch to 4000 rpm with 1000HP. ??
Bro has over 30% Slip. The X dimension on the #3 way to low, sticking out about 5 inches below Hull !!!!!!:eek: Gonna stick a #4 on there with a 31 Pitch prop and the Baby should fly @ 5500 RPM with over 100 MPH .:rolleyes: 98% it should work ?!:D |
Originally Posted by daredevil
(Post 2601098)
We kind of found out what the problem is !
Bro has over 30% Slip. The X dimension on the #3 way to low, sticking out about 5 inches below Hull !!!!!!:eek: Gonna stick a #4 on there with a 31 Pitch prop and the Baby should fly @ 5500 RPM with over 100 MPH .:rolleyes: 98% it should work ?!:D I think it will go well over 100, with the big power. If not i'm sinking it. |
Hell,you better look at that little crack !
Otherwise it will sink when you go 100 !!!!!!:eek::D |
| All times are GMT -5. The time now is 01:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.