Offshoreonly.com - bravo to xr hub

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)

- - bravo to xr hub (https://www.offshoreonly.com/forums/prop-talk/196602-bravo-xr-hub.html)

MILD THUNDER

10-03-2008 07:09 AM

bravo to xr hub

I have a set of maximus with std. bravo hubs. Also have a pair of bravo 4blades with xr hubs. Can i just swap the hubs in order to swap props? Do I need a press or anything?

tony manzella

10-03-2008 07:24 AM

Brv to Xr's

A press would be best but you could get them apart with out , just be a tad carefull as not to get APE like getting them apart

t500hps

10-03-2008 07:33 AM

Mine aren't in very tight so I just use the 1 1/16 socket that you use for the prop nut to knock the hub out from the "top". With mine I don't even need a hammer, just hit it hard with the palm of my hand.

bbladesprops

10-03-2008 04:19 PM

A wooden dowel will work well too.

All times are GMT -5. The time now is 03:15 PM.