:p WOW Gerry doesn't need any miracles for speed:p he could break 110 with a baja 33 on the bow as a dingy:p with those turbines;), plus he bought 40 herrings for his sixes. good luck on ebay. Gerry it was fun sunday cruising around the bay at a 1/4 throttle doing 110 squashing those cruiser wakes like a bump in the road, to bad there were to may sailboats around and no one to run against they all hide until we parked for lunch at CHELO'S in warwick RI..its pretty cool when cig 46 spiderman doesn't raise a eye when pulling in but half the marina watches you leave:ernaehrung004:, thanks again see you tomorrow dude.

if someone gives me my asking prices plus freight Ill work it out with the lovely prop lady Julie to make any adjustments to them, my understanding with cnc stuff you shouldnt touch them maybe adding or subtracting diffuser ring or clean uponly if needed

This quote was ment for Raggededge sorry wasnt paying attention

send me the 31s if i like them i will take them..:eekdrop:

the 31,s are possibly sold first come first serve 2300.00 plus freight 412 781-0881 call will exchange adresses

Just talked to Herring 5 blades cost 3250.00 plus freight 6blades are 3750.00 plus freight 3 to 4 weeks out and my 31,s will replace 32 x15 1/2 maxiumus 2to 4 mph faster for what its worth

I believe Hering numbers each prop, what are the ID#'s on the 30" 5 blades with the diffusers? Put the numbers up here and I'll call Hering to see if they will work.

You are not that far from here, I'd even meet you mid way to get them if they are right for the boat. Hering should be able to make the call, but not unless they know what we're talking about. You need to understand that I don't need a shelf full of props that are not quite what I want either, let me know.

no problem how close are you to Erie Pa

Potsdam N.Y. , not sure exactly, but about 4.5 to 5 from Rochester.

The no,s on the 30,s are12237 and 31,s are 11619