#3 drive adapter ?
 

I have a #3 drive on my 78 Pantera and i want a wider selection of props to choose from. I heard theres an adapter available to make this happen. Does anyone know who makes them? Thanks Jaime

Speed & Custom Marine ( Scott Mander ) has them !!!!

There is a 26 to 19 spline but I don't know of a 19 to 26 spline.

Brett

There is no need for a wide selection of props if you just order the right one from BBlades. :coolcowboy:

Look in the swap shop, there was a guy who had some of these adapters you are looking for. Unless they sold all ready. They will work on some of the props, but not all of them..

Good luck

thanks for the info, ill check it out.

arneson makes them.

I may have 2 of these adapters available. Also have 17 1/2 x 29 Mercury labbed four blades. Email [email protected]

thanks, i found the guy in the classi but good thing i havnt called. Arneson is 1hr away and its always fun to go by there. Ill try calling tomorrow, Jaime