Go Back  Offshoreonly.com > Technical > Prop Talk
Boat is scary now >

Boat is scary now

Notices

Boat is scary now

Old 11-05-2011, 09:50 PM
  #1  
Registered
Thread Starter
 
Join Date: Jul 2010
Location: Seabrook, Tx
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
Default Boat is scary now

Boat: 1995 Python 24', 540cid 625 hp, B1 with hydromotive nosecone. Propshaft is approx 6.5 inches below bottom of boat.

Boat will run 85 but wants to chine walk above 80. I have to trim a lot to get the bow to lift (also, bow will not lift until I am over 4500 rpms). I have a 25 Mirage, and 26 Turbo and both have very similar top speed. M25 turns 5850, Turbo is turning 5550. I have not tried a 4 blade.

What prop if any would maybe help?
Flying Tomato is offline  
Old 11-06-2011, 05:46 AM
  #2  
Platinum Member
Platinum Member
iTrader: (1)
 
scottw's Avatar
 
Join Date: Apr 2006
Location: Wenonah, NJ
Posts: 610
Likes: 0
Received 0 Likes on 0 Posts
Default

I read on the Mercury Racing site that the Mirage Plus gives you maximum bow lift. I run a 23p Mirage on my Switzer and the boat is really stable at speed. Tried a 24p Bravo 1 and that seemed to raise the transom. Made the boat seem really loose. Cruise speed was better but top end was equal. My prop is 5.5 inches deep but I only have a 21 degree deadrise. Also I am not pushing the HP you are putting out.
scottw is offline  
Old 11-06-2011, 10:13 PM
  #3  
Registered
 
Revd Up's Avatar
 
Join Date: Jan 2001
Location: Rockford, IL
Posts: 1,092
Received 21 Likes on 11 Posts
Default

Originally Posted by Flying Tomato
Boat: 1995 Python 24', 540cid 625 hp, B1 with hydromotive nosecone. Propshaft is approx 6.5 inches below bottom of boat.

Boat will run 85 but wants to chine walk above 80. I have to trim a lot to get the bow to lift (also, bow will not lift until I am over 4500 rpms). I have a 25 Mirage, and 26 Turbo and both have very similar top speed. M25 turns 5850, Turbo is turning 5550. I have not tried a 4 blade.

What prop if any would maybe help?
I would try a 26 pitch Bravo 1, or possibly a 28P since your running 625 hp.. The 4 blade should make the boat handle much better. If you want more bow lift have it labbed with some cup on the tips of the blades.
But before you do that, I would gather as many different props you can from your buddies ,and test them all in a couple hours ,on the same stretch of water. You will have a much better idea of what works and what doesn't for your boat.
Revd Up is offline  
Old 11-07-2011, 07:26 AM
  #4  
Registered
 
Join Date: May 2010
Posts: 638
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Flying Tomato
Boat: 1995 Python 24', 540cid 625 hp, B1 with hydromotive nosecone. Propshaft is approx 6.5 inches below bottom of boat.

Boat will run 85 but wants to chine walk above 80. I have to trim a lot to get the bow to lift (also, bow will not lift until I am over 4500 rpms). I have a 25 Mirage, and 26 Turbo and both have very similar top speed. M25 turns 5850, Turbo is turning 5550. I have not tried a 4 blade.

What prop if any would maybe help?
The fact that you are running a python 85 is part of the problem. I have owned two back when they were the baddest thing on lake lanier and I can tell you Jim never built them to do 70 let alone 85. A few guys in the lake pushed them that speeds and it was always a monster. The hull is just not designed for it. If you are stable at 80 it's probably because you have k planes. Not trying to knock th boat they were fun but like I said just not designed to go that fast. A far as props the mirage was always the fastest since the boat need a lot of bow lift. We used bravos with a lot of cup to get rid of the porposing at around 65mph.
GTOFFSHORE is offline  
Old 11-07-2011, 07:29 AM
  #5  
Gold Member
Gold Member
 
Dave M's Avatar
 
Join Date: Oct 2000
Location: Hollywood, MD, USA
Posts: 5,652
Received 122 Likes on 77 Posts
Default

The 24 Superboat I owned chine walked all over the place with a Mirage+. A bravo prop settled it right down.
Dave M is offline  
Old 11-07-2011, 11:57 AM
  #6  
Registered
iTrader: (2)
 
Join Date: Jul 2010
Location: Windsor, NC
Posts: 495
Likes: 0
Received 44 Likes on 11 Posts
Default

I have a hot boat aritcle where they tested a 24 Python from the factory with a 454 and a supercharger and 1.36 drive. They ran a 25 mirage and said they stopped testing at 83 due to the boat being so scary although it had more left in the motor.
cdail28590 is offline  
Old 11-10-2011, 09:30 AM
  #7  
Registered
 
AIR TIME's Avatar
 
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes on 0 Posts
Default

do you have full hyd steering, that helps alot. I have a new one for sale since my konrad ace came with its steering. add on helps a little, thats what I had on my baja 24ol that went mid 80s. but walked. you can learn to drive it by sawing the wheel and keeping it straight. props call brett bblades. b1 26
AIR TIME is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.