Offshoreonly.com - Prop washers for Hydromotive

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)

- - Prop washers for Hydromotive (https://www.offshoreonly.com/forums/prop-talk/280593-prop-washers-hydromotive.html)

VetteLT193

07-13-2012 08:27 AM

Prop washers for Hydromotive

Is the only difference on Hydromotive Vs. Mercruiser Torq thrust the Castle washers?

Basically, if I buy a new set of castle washers can I leave the thrust washer and everything else alone going from a Bravo 1 prop to a Hydromotive?

ThisIsLivin

07-17-2012 08:21 AM

It's been awhile since I had a Hydro on but if I remember correctly the thrust washers are identical.

verbi69

07-17-2012 08:41 AM

When I change out the Hydro's to Bravo's and vice/ vesa I used all the same hardware....and now you have me thinking as well.

97FASTech

07-17-2012 09:40 AM

Just swapped mine, Bravo 1 to Hydro QIV, used same hardware.

bbladesprops

07-17-2012 10:32 AM

Square bore Hydros use all the same stuff.

Brett

All times are GMT -5. The time now is 04:22 AM.