bbladesprops

BBLADES Winter Tune-Up Special Pricing

December 20, 2012


Make a New Year’s resolution for peak propeller performance!

Boaters know that propellers are the easiest and least expensive way to improve boat performance and boaters in the know, know that winter is the best time to have BBLADES Professional Propellers inspect, repair or improve their favorite wheel.

During the slower winter months the highly-skilled technicians at BBLADES can renovate and restore banged-up blades to like-new condition, or custom tweak extra performance from a prop through “Lab Finishing” in next to no time at all. So between New Year’s Day and February 28, 2013, BBLADES will do so at a discounted hourly rate of just $80.00. The special pricing may also be used as a gift certificate for the boater on your holiday list.

BBLADES can perform magic on almost any propeller– aluminum or stainless steel – from any manufacturer, inspecting for dents, dings and cracks the owner may not even know are there until they hit the water…when it’s too late.

Those needing replacement wheels can order on line, where BBLADES offers its own line of performance propellers; competitive pricing on Mercury, Hering, Hydromotive, Acme, Signature, Stilletto or Turbo, and can match the perfect prop to your boat through free consultation or the propeller demo program that allows boaters to “try before you buy.”

It’s never too early to start planning for your next boat outing, so BBLADES suggests avoiding the spring rush and taking advantage of its winter service discount.

For more information, join us at www.bblades.com or by calling 920-295-4435. BBLADES can also be found on Facebook.

Based in Princeton, Wisconsin, BBLADES Professional Propellers is a full service propeller company offering consultation, inspection and repair of any aluminum, stainless steel, nibral and brass propellers; “Lab-Finishing” or “Blueprinting” of stainless steel propellers; Its own line of performance propeller; competitive pricing on new props from Mercury, Hering, Hydromotive, Signature, Acme, Stilletto and Turbo; and the most comprehensive propeller testing program in the marine industry.

###

mcprodesign

I will be testing My Stock Maximus vs Hering here in less than a month. Once testing is done I wil lhave more numbers for you . Then I will ship you my stock maximus props. Go ahead and start the invoice.

bbladesprops

LOL!

I can't wait to hear the stock Max numbers versus the cnc'd Herings.
I think the overall performance at the end of the day with the Max's (post the recipe we decide) will be quite amazing...............

Merry Christmas.

B

bbladesprops

Just a reminder, there are 5 weeks of winter special pricing remaining.
Skip the Spring rush and send your propellers in for adjustments now.

Thank you,
Brett

CraneHillFast

just got mine back last week. It looks great and look forward to testing it out soon.

Eliminated572

Mine will be on your door step Thursday! We seen an increase of 2-3mph with the last prop you did for us so cant wait to see this next one. Thanks again for all the advise and look forward to another badass wheel from BBlades! Thanks again -Chris

bbladesprops

Down to 23 days till the end of the winter special.
Any propellers in shop before March 1st qualify.
Now is the time to beat the Spring rush!

Brett

F-2 Speedy

iTrader: (6)

I'll be calling for the try and buy after the new motors are dyno'd and back in the boat.

NeverEnoughNOLA

Thanks a million Brett! I took advantage of this special you were running, and it sure payed off. I went from 70mph to 74mph gps on my 27' Fever, turning right at 5000 rpms. Motor is a stock hp500, prop is now labbed with a slight cup, 24 pitch hydromotive Q-IV. Thanks again!

Jonathan

skydog

Hey buddy my prop you will have tomorrow, hope you can fix her.(new water and rocks sucks LOL) It is on my 27 Daytona ran just over 130MPH with that prop. Now have more HP... So if you can fix, make her stiff!

Thank you Matt/Skydog