What prop for Pro Charged 253 Checkmate
 

1997 Checkmate Convincor 253 / Procharged 502 with Lightning Headers / Bravo XZ 1.36 ratio. Does anyone have a similar set-up ? What size prop are you running?

What kind of HP are we looking at?
Do you have any idea on the wet weight of the package?

Brett

700 HP, Wet weight would be 4500 lbs. Thanks Brett you steered me right on my last boat.

Ok,
You realize with that HP to weight ratio and hull design you are looking at a potential 100 mph set up.
You would need to turn a 30 pitch propeller at 5400 rpm with a 12% slip.
I'd bolt on anything in the 28 to 30 pitch range to get a base line and we can discuss the results and go from there.
Call me if you need a test propeller and we can help you out.

Brett

A 253 with 700hp will run right around 85mph, what rpm do you need to turn? anything else done to motor?

id suggest 26p bravo 1...... @ 5400 and 85mph a 26p will be around 13% slip

Motor is bone stock with the lightning headers and pro charger, intercooler at 7 lbs. I am currently running a 30 pitch Bravo1 prop which seemed about right to me because I assumed I had a1.50 ratio outdrive. But when we opened up the out drive and it was a 1.36 it made me second guess my prop size. I have owned the boat a short time and really have not had it on any good wide open runs yet. I believe I still have the stock rev limiter which is 5150?

At that rpm you still may be slightly over pitched, get some good runs in and see, but you should be somewhere around 85mph

hows it running?

My drive is a 1.5 ratio. with the 30 Pitch I am about 82 mph at 5000 rpm. That where it starts leaning out. I am upgrading my fuel system right now.

Where you able to get it dialed in? Does this hull have the notched pad/transom?