![]() |
Clueless on prop selection
I need help selecting a prop for my new boat. I know it's nothing like the monsters you guys have, but I know the knowlee here is plentiful.
My boat is an 88 Cobia Allante bowrider with a 260hp 350 Merc. The engine is all stock for now. I'm looking for a good all around prop and one for if I want more top end. Any suggestions would be great. Thanks!! |
Need to know what outdrive and ratio you are running, and desired rpm or rpm range of engine, probably somewhere around 4600-5000. What prop is on it now, gps speed and rpm? If we have a base run to start from we can go from there. If for some reason it didnt come with a prop, borrow a 21p and tell us the numbers.
|
Right now the engine is the 260hp 350 Merc Alpha 1. I have yet to put the boat in the water due to delayed parts arrival.
|
What is your ultimate is important as well.
If you are planning to do watersports or only to go fast will help to determine the best casting option. Brett |
Thanks Brett. What I'm looking for is a good waterspouts prop and an all out speed prop.
|
Ok, these are not one in the same.
For watersports we like 4-5 blade propellers and for speed on your hull we recommend 3 blade props. So, it is best if we discuss this on the phone and we can give you some options and potentially some test props. Call anytime. Thank you, Brett |
Brett.....you're the man! Thanks!!
|
Took boat out yesterday. It had a miss. It was running 45ish when finally on plane at 4500 rpm. The prop is a 15"x17 three blade prop.
|
Originally Posted by Jonesyfxr
(Post 4124066)
Took boat out yesterday. It had a miss. It was running 45ish when finally on plane at 4500 rpm. The prop is a 15"x17 three blade prop.
|
We had to put somebody in the bow for the boat to get on plane.
|
| All times are GMT -5. The time now is 05:58 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.