Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   looking for FAST cruising prop ? for eliminator (https://www.offshoreonly.com/forums/prop-talk/320002-looking-fast-cruising-prop-eliminator.html)

pstorti 11-11-2014 08:55 PM


Originally Posted by dancing bear (Post 4217857)
I've talked to 2 cat guys recently and they both said the XR drives are a little weak for 5 blades. Is that true?
With your engines and that size boat no. I only had XZ drives on mine.

pstorti, your experience says you had same top speed with 29P 5 blade as a 30P 4 blade. Is that normal when you go to 5B should you go down 1 pitch?
Yes

I also loved your action on opening air intake, it even seems to my newbie eyes it's a little short on air intake.

Trust me do back to back top speed runs and you will see the difference, if you have those slotted billet aluminum intakes. Your engines must be starving more than mine I only had 375hp per side.

blindriver 11-12-2014 12:16 PM

Yes stock props boats runs very well with them. 34 5 blade maximus

pstorti 11-12-2014 08:38 PM

Proves my point then, there is no substitute for testing props on your own boat, even the same model can be different from one to the next. on my 28 I hit a wall at 80mph with the Maximus, but since you have more power and its a 30 they worked.

dancing bear 11-13-2014 07:38 AM

well after talking to BBlades AND Bob Leach owner Eliminator, and a couple guys here I'm going with 34" 5 maximus. Seems to be the right blade for starters! MANY MANY thanks for everybody and looking forward for more improvements for my fast cruiser.

Seeing how I'm 65 and have boated for 60 of those years I've gotta stay out of the sun, so here's my next question, I have factory really nice hide away bimini top. stainless, proper length etc. Bob sez 60 MPH tops,mmmmmmmmm this boat doesn't come alive until 80!
Anybody ever see a custom permanent aluminum top, something like the newer cobalts on a catamaran? Yea, yea, I'm walking into that one but with my skin issues I'm gonna stay fast on water one way or the other! chuck

Sydwayz 11-13-2014 08:46 AM

1 Attachment(s)
Look into whoever is the best welder in your area for T-tops and center console fishing boat rigging. I am sure they could make something work for you, but it would have to be made with studs through bolted into the gunwales. This would also allow you to remove it fairly easily. Remember, it's not just on the water that you have to worry about it, but on the trailer too, towing at highway speeds. The T-tops on the go-fast CCs often slow them down by 5 mph or so, and they also turn them into sailboats when on the trailer.

You may be better off investing in sun-block clothing.
[ATTACH=CONFIG]532544[/ATTACH]

dancing bear 11-13-2014 05:59 PM

Oh yea, the best guy is right across from my shop, he does incredible work here on the north side of Houston. All kinds of t tops, raised seating platforms of all kinds, built in rocket launchers and cup holders etc etc. Once I get a design I'm sure he'll be able to do anything I can come up with. I've just never seen a go fast of any kind with an aftermarket top on it. I've seen some big cruisers with add on hard tops that were absolutely perfect and looked like they came with the boat. Yea, get that on a cat! LOL!

pstorti 11-13-2014 07:21 PM

dancing bear what kind of boat is your diesel cc, just noticed that in your sig.

dancing bear 11-13-2014 10:10 PM

I have a 2004 390 Sea Ray motoryacht, aft cabin type boat. twin 480 cummins, boat does 35mph. That's fast for that type boat, just takes 50 GPH to do that!

pstorti 11-14-2014 11:18 AM

Oh ok thought it was a center console, not bad for that huge thing. I cruise at 50 burning 25 GPH!

Dean Ferry 11-17-2014 01:11 PM

1 Attachment(s)

Originally Posted by dancing bear (Post 4218829)
Oh yea, the best guy is right across from my shop, he does incredible work here on the north side of Houston. All kinds of t tops, raised seating platforms of all kinds, built in rocket launchers and cup holders etc etc. Once I get a design I'm sure he'll be able to do anything I can come up with. I've just never seen a go fast of any kind with an aftermarket top on it. I've seen some big cruisers with add on hard tops that were absolutely perfect and looked like they came with the boat. Yea, get that on a cat! LOL!

Here our Talon 25 with a custom built Bimini top that is good till about 70MPH. At least that is as fast as I have had it up to....


All times are GMT -5. The time now is 05:37 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.