will a mirage plus ss prop fit a bravo1
 

I have a 92 26' sleekcraft with a merc454 and bravo1. I found a nice 21p mirage plus prop for $80 like new. Maybe a dumb question but do the fit genericaly on all drives or could the hub be specific to a particular drive? Without taking mine off and comparing is there any way to tell. Thx

Btw. The owner said it was off a Tahoe. Do you think the splines would work on a bravo drive. Thx

yes

Saw your RPM/Speed issue thread, What prop are you currently running?

You're gonna laugh, but I don't know. I didn't look last year when I bought it, and since I leave it in the water during the season (and I didn't have another prop anyway), I didn't bother to check even though it wasn't reaching wot. I was gonna check before launching again this season but forgot. I plan to take it out this weekend, and will check then. But I think I recall the previous owner saying it is 23p

Thanks

I got the new prop for $60 cause it didn't come with a hub. It does have a minor 'rash' on one of the fins (see pictures). I really do not know much about props, so question is whether this small rash will have any impact. I ask cause I had a buddy selling a prop once that had the smallest of a dent in a fin, and he had a hell of a time selling it cause buyers suggested even the smallest nick causes performance issues.

Second question. Doing just a little research, I think the Flo Torq sounds like a good hub. Any feedback on this make of hub, or any other suggestions.

Lastly, regardless of the hub I get, I assume it needs to be specific to my prop shaft (as far as the number of teeth go). Anyone know the number of teeth on a 92 bravo. I guess I'll find out this weekend when I bring the boat out, but I'd love to have the new hub bought and prop ready to go so I can swap it then.

Oh, also does anyone have any feedback on the quality/performance of the Mirage Plus prop? Again doing a little searching, seems like boat owners are partial to specific brands of props. What can I expect out of this prop?

Thanks

http://pic90.picturetrail.com/VOL216.../411368691.jpg

http://pic90.picturetrail.com/VOL216.../411368692.jpg

http://pic90.picturetrail.com/VOL216.../411368693.jpg


Thanks

I had a 95 26 ft Sleekcraft with a 7.4 and ran a 21 pitch prop on it.

The part number you seek is FLO-TORQ II HUB KIT - 835257Q1 (MERCURY, ALPHA ONE, BRAVO ONE). The big O/Bs, Alphas and Bravos are all interchangeable. I've ran a Mirage + on all three lower units with the same hub kit.

Edit- 835257K1 will also work, rated to 400hp on Alpha/Bravo drives

Nothing wrong with that prop. Ignore those dings and run it.