Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   prop advice (https://www.offshoreonly.com/forums/prop-talk/332943-prop-advice.html)

cig20 12-05-2015 10:37 AM

prop advice
 
22 ft donzi
454 425 hp trs out drive
looking for best prop

rexcramer1 12-05-2015 03:51 PM

Mirage plus or Mirage is a good place to start, what are you running now and what speed and rpm

abones 12-05-2015 04:12 PM

I have a Mirage solid hub 25p right rotation in perfect condition, if you think it might for you..

Also have something that might interest you if you are looking for a performance upgrade!

cig20 12-06-2015 03:01 PM


Originally Posted by rexcramer1 (Post 4382561)
Mirage plus or Mirage is a good place to start, what are you running now and what speed and rpm

mirage plus 23 4800 rpm guessing about 62+

cig20 12-06-2015 03:02 PM


Originally Posted by abones (Post 4382567)
I have a Mirage solid hub 25p right rotation in perfect condition, if you think it might for you..

Also have something that might interest you if you are looking for a performance upgrade!

always looking for up grades what ya got

abones 12-06-2015 04:51 PM

I have a super shorty drive asm that will bolt up to the TRS gimble, most effective on 18-22 foot singles. good for 750 HP. pretty rare piece, I would think anyone with a small TRS boat can pick up speed just from eliminating some drag and surface the prop.

rexcramer1 12-06-2015 07:39 PM

On smaller, lighter boats like yours going from the Mirage Plus to a regular Mirage might pick up a bit of speed as well. I have a 23p Mirage but it is a little chipped up not mint

Trash 12-07-2015 10:26 AM

If your posted speed is accurate you are just about where you need to be. You might just want to have the prop worked on to fine tune particular regimes.


All times are GMT -5. The time now is 12:05 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.