Bravo1x- bravo xr
 

Hey guys,

I'm looking to borrow a left hand bravo1 28p from a friend to try on my boat. The prop is coming off a 2006 bravo1x drive, and I will be trying to use it on an 01' xr drive. I know my prop shaft is 1.25, and has a metal hub(cast?) with the plastic delrin strips. I believe it is called a flo torque hub. He has never had his prop off the boat so he is not sure what he has. Does his bravo1x drive have a 1.25 prop shaft? And should His prop go right on my xr?

I'm looking to borrow his 28p lefty, to see if there is any handling difference between that and the 26p righty that I have always ran, also I'm running about 100 more hp than last year. Hoping to be in the water for next weekend to test the new power!
Thanks again

All you'll need to do is knock the hub out of his and put your XR hub in that prop.

Bravo 1X has 1" propshaft, but like JT said, just swap the hubs.

Ok, thanks guys!

I have a LH 26P Maximus for sale in the swap shop. Labbed by B-Blades, perfect shape. It will pull close to the same RPM as a 28P bravo.