Prop help for an Adrenaline V24
 

Adrenaline V24 with 496HO. 26P Bravo at 4800 rpm hits 70mph.
Can I gain a few MPH by going to a 28P lapped

Give it a try and find out.

probably not, you should be spinning at 5200, try labbing it less pitch and a little more cup

If the propeller is truly box stock, the correct lab process should get you to 5050 rpm and gain you about 2-3 mph.
Give us a call anytime and we can explain the process.

Brett

Find yourself a 26 or 27 Mirage 3 blade.... not the plus ..... fastest prop for that boat

Will a Mirage Prop fit on a XR drive?

as long as its not a solid hub prop

You will just need a HD FLO-TORQ Hub Kit

http://bblades.com/shop/hub-kits/mer...kit-840389k06/

Brett

What prop will be the best overall for my set up?

What area needs improvement , and what does not? I think you should try a stock 23P M+. don't think you have the HP to turn the 25 unless that bottom is on the flat side.

With the 26P Bravo it is really strong getting on plane. Almost instant.
Tops out at 4800 RPM = 70 MPH
I tried a 28P Bravo but lost RPM and speed remained the same.
I think I should be able to give up a little on the low end to gain more RPM and Speed.

Do I need to have a discussion with Bret before ordering a prop from his site?

Bret is the man to ask for sure. I'm a 3 blade user, and I have tried them all on a lot of boats. each blade on a 3 is way bigger and pushes a lot of water. I think they carry the boats I have better. and they stay hooked up in the fast turns way better. I tried 4 and 5 Blades. each has its place.