Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Prop Talk (https://www.offshoreonly.com/forums/prop-talk-165/)
-   -   BBLADES Releases 2 new BBLADES propellers to the marke! (https://www.offshoreonly.com/forums/prop-talk/344593-bblades-releases-2-new-bblades-propellers-marke.html)

bbladesprops 03-09-2017 03:19 PM


Originally Posted by offshoredrillin (Post 4535751)
resent

Still didn't get it. Please send to

[email protected]

Request it be forwarded to Brett

Thank you.

bbladesprops 03-09-2017 03:45 PM


Originally Posted by conneroutlaw (Post 4532049)
hey this jj from Dunkirk with the Baja, please send me your new email address. I tried emailing you and got a returned email

thanks jj

my email is [email protected]

Did your email go through? Did you get a response.
I'm starting to wory we might have a server issue?

Brett

bbladesprops 03-09-2017 04:30 PM


Originally Posted by NWPC (Post 4535885)
Labbed B1 for Rick Andersen

Rick, Because your slip numbers are so good with the stock 26 B1, 8.6%, it will be difficult to determine if the 4-SPEED will out-perform the Labbed Bravo.
The only way we will know for sure is to test them back to back. We have found the stock 4-SPEED to out-perform the stock Bravo 1 in the majority of tests. We are still learning on the Labbed versions of the 4-SPEED. If the 4-SPEED out-performs the B1 in stock form, it should do so in Labbed form. But, each application is different.
So, we can definitely test the 4-SPEED on your hull.

Thank you,
Brett

NWPC 03-09-2017 05:39 PM

Thanks Brett
It was just a thought.
I am sure the Labbed B! will work great.

offshoredrillin 03-09-2017 06:13 PM


Originally Posted by bbladesprops (Post 4535993)
Did your email go through? Did you get a response.
I'm starting to wory we might have a server issue?

Brett

i got no bounce back this time... i had server issue a few weeks back, but all worked out.

Padraig 03-09-2017 07:17 PM


Originally Posted by bbladesprops (Post 4535993)
Did your email go through? Did you get a response.
I'm starting to wory we might have a server issue?

Brett

Brett, I think he was directing that to me.

Padraig

VoodooRob 03-16-2017 12:58 PM

Talked to Brett today and we are going to get a set of the new 4 Speed for our boat. The 32 Maximus on there now were sent to him to get worked, we purchased the boat end of season last year and props didn't look good. Brett gave the Maximus the once over and it was a thumbs down for repairs. Will report back on how the new props perform, etc.

midwest272 03-19-2017 08:10 PM


Originally Posted by VoodooRob (Post 4538061)
Talked to Brett today and we are going to get a set of the new 4 Speed for our boat. The 32 Maximus on there now were sent to him to get worked, we purchased the boat end of season last year and props didn't look good. Brett gave the Maximus the once over and it was a thumbs down for repairs. Will report back on how the new props perform, etc.

looking forward to your results, searching for info on replacement for the same props .........good luck

bbladesprops 03-20-2017 02:19 PM


Originally Posted by VoodooRob (Post 4538061)
Talked to Brett today and we are going to get a set of the new 4 Speed for our boat. The 32 Maximus on there now were sent to him to get worked, we purchased the boat end of season last year and props didn't look good. Brett gave the Maximus the once over and it was a thumbs down for repairs. Will report back on how the new props perform, etc.

Rob's Maximus's were unrepeatable do to a 4 inch crack and some serious gouging ground into the blades from the last guy who worked on them.
Basically non cost effective.
should be picking up a truck load of castings this week!

Brett

VoodooRob 03-20-2017 02:46 PM


Originally Posted by bbladesprops (Post 4539168)
Rob's Maximus's were unrepeatable do to a 4 inch crack and some serious gouging ground into the blades from the last guy who worked on them.
Basically non cost effective.
should be picking up a truck load of castings this week!

Brett

Ok let me revise my trying to be polite to the previous owner. Looks like Fred Flintstone repaired the props and Ray Charles was in quality control.


All times are GMT -5. The time now is 05:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.