BBlades/ Brett
#1
Registered
Thread Starter
BBlades/ Brett
Brett, This is Tom Berger from Traverse city mi. Later last summer you helped me out with propping my 31 fountain cc. We went with the 4 blade O/Bs and they are awesome!. Just the right amount of lift and the gains are awesome from hole shot to top end. On the top I'm see 6 to 8 mph depending on the load I'm carrying (250 gallon fuelage) 68 mph-70 mph. We tried the 22p which hit the rev limiter and went with the 24p I'm right at 5700 rpm- 5800 rpm. It stays planted on hard turns and I couldnt be happier with my cruise speed. I know you told me to call you back and let you know how the 24p O/Bs worked out, but your busy and I see you on here a lot so I thought you can read this in your off time. Thanks again, your awesome to deal with..Tom
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Brett, This is Tom Berger from Traverse city mi. Later last summer you helped me out with propping my 31 fountain cc. We went with the 4 blade O/Bs and they are awesome!. Just the right amount of lift and the gains are awesome from hole shot to top end. On the top I'm see 6 to 8 mph depending on the load I'm carrying (250 gallon fuelage) 68 mph-70 mph. We tried the 22p which hit the rev limiter and went with the 24p I'm right at 5700 rpm- 5800 rpm. It stays planted on hard turns and I couldnt be happier with my cruise speed. I know you told me to call you back and let you know how the 24p O/Bs worked out, but your busy and I see you on here a lot so I thought you can read this in your off time. Thanks again, your awesome to deal with..Tom
Thank you Tom.
We appreciate your comments and sharing the results on this forum! It makes me feel sooo good when our efforts pay off.
I'll share this with the whole team.
Let us know whatever we can help with in the future.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]