![]() |
Originally Posted by Stuart grant
(Post 4726564)
In regard to your previous advice about a 17” X dimension, i have read in one of your other prop related posts that the prop shaft will then be about 5 inches from the bottom of the hull for my single vee. Is that correct?
I would guess that the original X Dim was closer to 15" with the prop closer to 7" below the bottom. Prop Tech has come a long way and the original boats were prob was set up to run a 3 blade prop. |
Thanks Griff, your historical context of prop height is insightful.
Even the humble racing bicycle has undergone a radical transformation over the last 40 years not to mention my humble 233😁. |
Originally Posted by Stuart grant
(Post 4726579)
Thirdchildhood, with your 22 donzi experience, where’s your propshaft in relation to the bottom of the hull?
|
Thanks for that thirdchildhood, so that’s a little deeper. I assume you’re happy with that?
Also with my prop selection, would there be any benefit in considering a more expensive 5 blade maximus prop over the standard bravo 1 four blade? |
Originally Posted by Stuart grant
(Post 4726612)
Thanks for that thirdchildhood, so that’s a little deeper. I assume you’re happy with that?
Also with my prop selection, would there be any benefit in considering a more expensive 5 blade maximus prop over the standard bravo 1 four blade? |
| All times are GMT -5. The time now is 01:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.